diff --git a/TFT_Drivers/ILI9163_Init.h b/TFT_Drivers/ILI9163_Init.h
new file mode 100644
index 0000000..6ca5de1
--- /dev/null
+++ b/TFT_Drivers/ILI9163_Init.h
@@ -0,0 +1,41 @@
+
+// This is the command sequence that initialises the ST7735 driver
+//
+// This setup information is in a format accecpted by the commandList() function
+// which reduces FLASH space, but on an ESP8266 there is plenty available!
+//
+// See ILI9341_Setup.h file for an alternative simpler format
+
+{
+	// Initialization commands for ILI9163 screens
+	static const uint8_t ILI9163_cmds[] PROGMEM =
+	{
+	17,    // 17 commands follow
+	0x01,  0 + TFT_INIT_DELAY, 120,  // Software reset
+	0x11,  0 + TFT_INIT_DELAY, 5,    // Exit sleep mode
+	0x3A,  1, 0x05, // Set pixel format
+	0x26,  1, 0x04, // Set Gamma curve 3
+	0xF2,  1, 0x01, // Gamma adjustment enabled
+	0xE0, 15, 0x3F, 0x25, 0x1C, 0x1E, 0x20, 0x12, 0x2A, 0x90,
+	          0x24, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, // Positive Gamma
+	0xE1, 15, 0x20, 0x20, 0x20, 0x20, 0x05, 0x00, 0x15,0xA7,
+	          0x3D, 0x18, 0x25, 0x2A, 0x2B, 0x2B, 0x3A, // Negative Gamma
+	0xB1,  2, 0x08, 0x08, // Frame rate control 1
+	0xB4,  1, 0x07,       // Display inversion
+	0xC0,  2, 0x0A, 0x02, // Power control 1
+	0xC1,  1, 0x02,       // Power control 2
+	0xC5,  2, 0x50, 0x5B, // Vcom control 1
+	0xC7,  1, 0x40,       // Vcom offset
+	0x2A,  4, 0x00, 0x00, 0x00, 0x7F, // Set column address
+	0x2B,  4 + TFT_INIT_DELAY, 0x00, 0x00, 0x00, 0x9F, 250, // Set page address
+	0x36,  1, 0xC8,       // Set address mode
+	0x29,  0,             // Set display on
+	};
+
+	commandList(ILI9163_cmds);
+
+    #ifdef CGRAM_OFFSET
+      colstart = 0;
+      rowstart = 32;
+    #endif
+}
\ No newline at end of file