diff --git a/TFT_Drivers/GC9A01_Defines.h b/TFT_Drivers/GC9A01_Defines.h
new file mode 100644
index 0000000..b6c5648
--- /dev/null
+++ b/TFT_Drivers/GC9A01_Defines.h
@@ -0,0 +1,34 @@
+// Change the width and height if required (defined in portrait mode)
+// or use the constructor to over-ride defaults
+#ifndef TFT_WIDTH
+  #define TFT_WIDTH  240
+#endif
+#ifndef TFT_HEIGHT
+  #define TFT_HEIGHT 320
+#endif
+
+// Delay between some initialisation commands
+#define TFT_INIT_DELAY 0x80
+
+// Generic commands used by TFT_eSPI.cpp
+#define TFT_NOP     0x00
+#define TFT_SWRST   0x01
+
+#define TFT_CASET   0x2A
+#define TFT_PASET   0x2B
+#define TFT_RAMWR   0x2C
+
+#define TFT_RAMRD   0x2E
+#define TFT_IDXRD   0x00 //0xDD // ILI9341 only, indexed control register read
+
+#define TFT_MADCTL  0x36
+#define TFT_MAD_MY  0x80
+#define TFT_MAD_MX  0x40
+#define TFT_MAD_MV  0x20
+#define TFT_MAD_ML  0x10
+#define TFT_MAD_BGR 0x08
+#define TFT_MAD_MH  0x04
+#define TFT_MAD_RGB 0x00
+
+#define TFT_INVOFF  0x20
+#define TFT_INVON   0x21
diff --git a/TFT_Drivers/GC9A01_Init.h b/TFT_Drivers/GC9A01_Init.h
new file mode 100644
index 0000000..947d37d
--- /dev/null
+++ b/TFT_Drivers/GC9A01_Init.h
@@ -0,0 +1,232 @@
+
+// This is the command sequence that initialises the GC9A01 driver
+
+{
+  writecommand(0xEF);
+  writecommand(0xEB);
+  writedata(0x14);
+
+  writecommand(0xFE);
+  writecommand(0xEF);
+
+  writecommand(0xEB);
+  writedata(0x14);
+
+  writecommand(0x84);
+  writedata(0x40);
+
+  writecommand(0x85);
+  writedata(0xFF);
+
+  writecommand(0x86);
+  writedata(0xFF);
+
+  writecommand(0x87);
+  writedata(0xFF);
+
+  writecommand(0x88);
+  writedata(0x0A);
+
+  writecommand(0x89);
+  writedata(0x21);
+
+  writecommand(0x8A);
+  writedata(0x00);
+
+  writecommand(0x8B);
+  writedata(0x80);
+
+  writecommand(0x8C);
+  writedata(0x01);
+
+  writecommand(0x8D);
+  writedata(0x01);
+
+  writecommand(0x8E);
+  writedata(0xFF);
+
+  writecommand(0x8F);
+  writedata(0xFF);
+
+  writecommand(0xB6);
+  writedata(0x00);
+  writedata(0x20);
+
+  writecommand(0x3A);
+  writedata(0x05);
+
+  writecommand(0x90);
+  writedata(0x08);
+  writedata(0x08);
+  writedata(0x08);
+  writedata(0x08);
+
+  writecommand(0xBD);
+  writedata(0x06);
+
+  writecommand(0xBC);
+  writedata(0x00);
+
+  writecommand(0xFF);
+  writedata(0x60);
+  writedata(0x01);
+  writedata(0x04);
+
+  writecommand(0xC3);
+  writedata(0x13);
+  writecommand(0xC4);
+  writedata(0x13);
+
+  writecommand(0xC9);
+  writedata(0x22);
+
+  writecommand(0xBE);
+  writedata(0x11);
+
+  writecommand(0xE1);
+  writedata(0x10);
+  writedata(0x0E);
+
+  writecommand(0xDF);
+  writedata(0x21);
+  writedata(0x0c);
+  writedata(0x02);
+
+  writecommand(0xF0);
+  writedata(0x45);
+  writedata(0x09);
+  writedata(0x08);
+  writedata(0x08);
+  writedata(0x26);
+  writedata(0x2A);
+
+  writecommand(0xF1);
+  writedata(0x43);
+  writedata(0x70);
+  writedata(0x72);
+  writedata(0x36);
+  writedata(0x37);
+  writedata(0x6F);
+
+  writecommand(0xF2);
+  writedata(0x45);
+  writedata(0x09);
+  writedata(0x08);
+  writedata(0x08);
+  writedata(0x26);
+  writedata(0x2A);
+
+  writecommand(0xF3);
+  writedata(0x43);
+  writedata(0x70);
+  writedata(0x72);
+  writedata(0x36);
+  writedata(0x37);
+  writedata(0x6F);
+
+  writecommand(0xED);
+  writedata(0x1B);
+  writedata(0x0B);
+
+  writecommand(0xAE);
+  writedata(0x77);
+
+  writecommand(0xCD);
+  writedata(0x63);
+
+  writecommand(0x70);
+  writedata(0x07);
+  writedata(0x07);
+  writedata(0x04);
+  writedata(0x0E);
+  writedata(0x0F);
+  writedata(0x09);
+  writedata(0x07);
+  writedata(0x08);
+  writedata(0x03);
+
+  writecommand(0xE8);
+  writedata(0x34);
+
+  writecommand(0x62);
+  writedata(0x18);
+  writedata(0x0D);
+  writedata(0x71);
+  writedata(0xED);
+  writedata(0x70);
+  writedata(0x70);
+  writedata(0x18);
+  writedata(0x0F);
+  writedata(0x71);
+  writedata(0xEF);
+  writedata(0x70);
+  writedata(0x70);
+
+  writecommand(0x63);
+  writedata(0x18);
+  writedata(0x11);
+  writedata(0x71);
+  writedata(0xF1);
+  writedata(0x70);
+  writedata(0x70);
+  writedata(0x18);
+  writedata(0x13);
+  writedata(0x71);
+  writedata(0xF3);
+  writedata(0x70);
+  writedata(0x70);
+
+  writecommand(0x64);
+  writedata(0x28);
+  writedata(0x29);
+  writedata(0xF1);
+  writedata(0x01);
+  writedata(0xF1);
+  writedata(0x00);
+  writedata(0x07);
+
+  writecommand(0x66);
+  writedata(0x3C);
+  writedata(0x00);
+  writedata(0xCD);
+  writedata(0x67);
+  writedata(0x45);
+  writedata(0x45);
+  writedata(0x10);
+  writedata(0x00);
+  writedata(0x00);
+  writedata(0x00);
+
+  writecommand(0x67);
+  writedata(0x00);
+  writedata(0x3C);
+  writedata(0x00);
+  writedata(0x00);
+  writedata(0x00);
+  writedata(0x01);
+  writedata(0x54);
+  writedata(0x10);
+  writedata(0x32);
+  writedata(0x98);
+
+  writecommand(0x74);
+  writedata(0x10);
+  writedata(0x85);
+  writedata(0x80);
+  writedata(0x00);
+  writedata(0x00);
+  writedata(0x4E);
+  writedata(0x00);
+
+  writecommand(0x98);
+  writedata(0x3e);
+  writedata(0x07);
+
+  writecommand(0x35);
+  writecommand(0x21);
+
+  writecommand(0x11);
+  delay(120);
+  writecommand(0x29);
+  delay(20);
+}
diff --git a/TFT_Drivers/GC9A01_Rotation.h b/TFT_Drivers/GC9A01_Rotation.h
new file mode 100644
index 0000000..a4c8f3e
--- /dev/null
+++ b/TFT_Drivers/GC9A01_Rotation.h
@@ -0,0 +1,28 @@
+
+// This is the command sequence that rotates the GC9A01 driver coordinate frame
+
+  rotation = m % 4;
+
+  writecommand(TFT_MADCTL);
+  switch (rotation) {
+    case 0: // Portrait
+      writedata(TFT_MAD_BGR);
+      _width  = _init_width;
+      _height = _init_height;
+      break;
+    case 1: // Landscape (Portrait + 90)
+      writedata(TFT_MAD_MX | TFT_MAD_MV | TFT_MAD_BGR);
+      _width  = _init_height;
+      _height = _init_width;
+      break;
+    case 2: // Inverter portrait
+      writedata(TFT_MAD_MX | TFT_MAD_MY | TFT_MAD_BGR);
+      _width  = _init_width;
+      _height = _init_height;
+      break;
+    case 3: // Inverted landscape
+      writedata(TFT_MAD_MV | TFT_MAD_MY | TFT_MAD_BGR);
+      _width  = _init_height;
+      _height = _init_width;
+      break;
+  }
diff --git a/TFT_eSPI.cpp b/TFT_eSPI.cpp
index 46b240c..7e0a70d 100644
--- a/TFT_eSPI.cpp
+++ b/TFT_eSPI.cpp
@@ -625,6 +625,9 @@ void TFT_eSPI::init(uint8_t tc)
 #elif defined (SSD1963_DRIVER)
     #include "TFT_Drivers/SSD1963_Init.h"
 
+#elif defined (GC9A01_DRIVER)
+     #include "TFT_Drivers/GC9A01_Init.h"
+
 #endif
 
 #ifdef TFT_INVERSION_ON
@@ -704,6 +707,9 @@ void TFT_eSPI::setRotation(uint8_t m)
 #elif defined (SSD1963_DRIVER)
     #include "TFT_Drivers/SSD1963_Rotation.h"
 
+#elif defined (GC9A01_DRIVER)
+     #include "TFT_Drivers/GC9A01_Rotation.h"
+
 #endif
 
   delayMicroseconds(10);
diff --git a/User_Setup_Select.h b/User_Setup_Select.h
index a8dcdb6..ec0268e 100644
--- a/User_Setup_Select.h
+++ b/User_Setup_Select.h
@@ -168,6 +168,9 @@
 #elif defined (SSD1963_800BD_DRIVER)
      #include "TFT_Drivers/SSD1963_Defines.h"
      #define  TFT_DRIVER 0x1963
+#elif defined (GC9A01_DRIVER)
+     #include "TFT_Drivers/GC9A01_Defines.h"
+     #define  TFT_DRIVER 0x9A01
                               // <<<<<<<<<<<<<<<<<<<<<<<< ADD NEW DRIVER HERE
                               // XYZZY_init.h and XYZZY_rotation.h must also be added in TFT_eSPI.cpp
 #elif defined (XYZZY_DRIVER)
diff --git a/User_Setups/Setup46_GC9A01_ESP32.h b/User_Setups/Setup46_GC9A01_ESP32.h
new file mode 100644
index 0000000..b24a74d
--- /dev/null
+++ b/User_Setups/Setup46_GC9A01_ESP32.h
@@ -0,0 +1,26 @@
+#define GC9A01_DRIVER
+
+#define TFT_MISO 19
+#define TFT_MOSI 23
+#define TFT_SCLK 18
+#define TFT_CS    15  // Chip select control pin
+#define TFT_DC    2  // Data Command control pin
+#define TFT_RST   4  // Reset pin (could connect to RST pin)
+//#define TFT_RST  -1  // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
+
+#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
+#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
+#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
+#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
+#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
+#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
+#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
+#define SMOOTH_FONT
+
+#define SPI_FREQUENCY  40000000
+
+#define SPI_READ_FREQUENCY  20000000
+
+#define SPI_TOUCH_FREQUENCY  2500000
+
+// #define SUPPORT_TRANSACTIONS
\ No newline at end of file