Bodmer/TFT_eSPI
1
0
Fork 1
mirror of https://github.com/Bodmer/TFT_eSPI.git synced 2025-08-11 00:24:44 +02:00
Code Issues Packages Projects Releases Wiki Activity

Update Setup60_RP2040_ILI9341.h

Browse Source
This commit is contained in:
Bodmer
2021-03-31 21:51:30 +01:00
committed by GitHub
parent 4e8497c159
commit 356095bdf3
1 changed files with 9 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
User_Setups/Setup60_RP2040_ILI9341.h
View File

@@ -107,13 +107,13 @@
// We must use hardware SPI, a minimum of 3 GPIO pins is needed. // We must use hardware SPI, a minimum of 3 GPIO pins is needed.
// Typical setup for the RP2040 is : // Typical setup for the RP2040 is :
// //
// Display SDO/MISO to RP2040 pin D8 (or leave disconnected if not reading TFT) // Display SDO/MISO to RP2040 pin D0 (or leave disconnected if not reading TFT)
// Display LED to RP2040 pin 3V3 or 5V // Display LED to RP2040 pin 3V3 or 5V
// Display SCK to RP2040 pin D10 // Display SCK to RP2040 pin D2
// Display SDI/MOSI to RP2040 pin D11 // Display SDI/MOSI to RP2040 pin D3
// Display DC (RS/AO)to RP2040 pin D18 // Display DC (RS/AO)to RP2040 pin D18 (can use another pin if desired)
// Display RESET to RP2040 pin D19 // Display RESET to RP2040 pin D19 (can use another pin if desired)
// Display CS to RP2040 pin D20 (or GND, see below) // Display CS to RP2040 pin D20 (can use another pin if desired, or GND, see below)
// Display GND to RP2040 pin GND (0V) // Display GND to RP2040 pin GND (0V)
// Display VCC to RP2040 5V or 3.3V (5v if display has a 5V to 3.3V regulator fitted) // Display VCC to RP2040 5V or 3.3V (5v if display has a 5V to 3.3V regulator fitted)
// //
@@ -125,9 +125,9 @@
// to be toggled during setup, so in these cases the TFT_CS line must be defined and connected. // to be toggled during setup, so in these cases the TFT_CS line must be defined and connected.
// For the Pico use these #define lines // For the Pico use these #define lines
#define TFT_MISO D8 #define TFT_MISO D0
#define TFT_MOSI D11 #define TFT_MOSI D3
#define TFT_SCLK D10 #define TFT_SCLK D2
#define TFT_CS D20 // Chip select control pin #define TFT_CS D20 // Chip select control pin
#define TFT_DC D18 // Data Command control pin #define TFT_DC D18 // Data Command control pin
#define TFT_RST D19 // Reset pin (could connect to Arduino RESET pin) #define TFT_RST D19 // Reset pin (could connect to Arduino RESET pin)