diff --git a/README.md b/README.md
index 0943433..cea6366 100644
--- a/README.md
+++ b/README.md
@@ -70,7 +70,7 @@ ILI9341 and ST7796 SPI based displays are recommended as starting point for expe
 
 The library supports some TFT displays designed for the Raspberry Pi (RPi) that are based on a ILI9486 or ST7796 driver chip with a 480 x 320 pixel screen. The ILI9486 RPi display must be of the Waveshare design and use a 16 bit serial interface based on the 74HC04, 74HC4040 and 2 x 74HC4094 logic chips. Note that due to design variations between these displays not all RPi displays will work with this library, so purchasing a RPi display of these types solely for use with this library is not recommended.
 
-A "good" RPi display is the [MHS-4.0 inch Display-B type ST7796](http://www.lcdwiki.com/MHS-4.0inch_Display-B) which provides good performance. This has a dedicated controller and can be clocked at up to 80MHz with the ESP32 (55MHz with STM32 and 40MHz with ESP8266). The [MHS-3.5 inch RPi ILI9486](http://www.lcdwiki.com/MHS-3.5inch_RPi_Display) based display may also work but this has not been tested.
+A "good" RPi display is the [MHS-4.0 inch Display-B type ST7796](http://www.lcdwiki.com/MHS-4.0inch_Display-B) which provides good performance. This has a dedicated controller and can be clocked at up to 80MHz with the ESP32 (55MHz with STM32 and 40MHz with ESP8266). The [MHS-3.5 inch RPi ILI9486](http://www.lcdwiki.com/MHS-3.5inch_RPi_Display) based display is also supported.
 
 Some displays permit the internal TFT screen RAM to be read, some of the examples use this feature. The TFT_Screen_Capture example allows full screens to be captured and sent to a PC, this is handy to create program documentation.
 
diff --git a/TFT_Drivers/ILI9486_Init.h b/TFT_Drivers/ILI9486_Init.h
index dc8fbfc..3ac74ac 100644
--- a/TFT_Drivers/ILI9486_Init.h
+++ b/TFT_Drivers/ILI9486_Init.h
@@ -8,8 +8,8 @@
 {
 // From https://github.com/notro/fbtft/blob/master/fb_ili9486.c
 
-    //writecommand(0x01); // SW reset
-    //delay(120);
+    writecommand(0x01); // SW reset
+    delay(120);
 	
     writecommand(0x11); // Sleep out, also SW reset
     delay(120);
diff --git a/library.json b/library.json
index 2e8ca6b..8410d46 100644
--- a/library.json
+++ b/library.json
@@ -1,8 +1,8 @@
 {
   "name": "TFT_eSPI",
   "version": "2.4.42",
-  "keywords": "Arduino, tft, ePaper, display, Pico, RP2040, STM32, ESP8266, NodeMCU, ESP32, M5Stack, ILI9341, ST7735, ILI9163, S6D02A1, ILI9481, ILI9486, ILI9488, ST7789, RM68140, SSD1351, SSD1963, ILI9225, HX8357D",
-  "description": "A TFT and ePaper SPI graphics library with optimisation for Raspberry Pi Pico, ESP8266, ESP32 and STM32",
+  "keywords": "Arduino, tft, display, ttgo, LilyPi, WT32_SC01, ePaper, display, Pico, RP2040_Nano_Connect, RP2040, STM32, ESP8266, NodeMCU, ESP32, M5Stack, ILI9341, ST7735, ILI9163, S6D02A1, ILI9481, ILI9486, ILI9488, ST7789, ST7796, RM68140, SSD1351, SSD1963, ILI9225, HX8357D, GC9A01, R61581",
+  "description": "A TFT and ePaper SPI graphics library with optimisation for Raspberry Pi Pico, RP2040, ESP8266, ESP32 and STM32",
   "repository":
   {
     "type": "git",