diff --git a/User_Setup_Select.h b/User_Setup_Select.h
index 1c2ffbb..e1e5148 100644
--- a/User_Setup_Select.h
+++ b/User_Setup_Select.h
@@ -130,12 +130,13 @@
 
 //#include <User_Setups/Setup205_ESP32_TouchDown_S3.h>     // Setup file for the ESP32 TouchDown S3 based on ILI9488 480 x 320 TFT 
 
-//#include <User_Setups/Setup206_LilyGo_T_Display_S3.h>
-//#include <User_Setups/Setup207_LilyGo_T_HMI.h>
+//#include <User_Setups/Setup206_LilyGo_T_Display_S3.h>     // For the LilyGo T-Display S3 based ESP32S3 with ST7789 170 x 320 TFT
+//#include <User_Setups/Setup207_LilyGo_T_HMI.h>            // For the LilyGo T-HMI S3 based ESP32S3 with ST7789 240 x 320 TFT
 
 //#include <User_Setups/Setup208_ESP32_S3_Box_Lite.h>      // For the ESP32 S3 Box Lite (may also work with ESP32 S3 Box)
 
 //#include <User_Setups/Setup209_LilyGo_T_Dongle_S3.h>      // For the LilyGo T-Dongle S3 based ESP32 with ST7735 80 x 160 TFT
+// #include <User_Setups/Setup210_LilyGo_T_Embed_S3.h>         // For the LilyGo T-Embed S3 based ESP32S3 with ST7789 170 x 320 TFT
 
 //#include <User_Setups/Setup301_BW16_ST7735.h>            // Setup file for Bw16-based boards with ST7735 160 x 80 TFT
 
diff --git a/User_Setups/Setup210_LilyGo_T_Embed_S3.h b/User_Setups/Setup210_LilyGo_T_Embed_S3.h
new file mode 100644
index 0000000..d3b815a
--- /dev/null
+++ b/User_Setups/Setup210_LilyGo_T_Embed_S3.h
@@ -0,0 +1,43 @@
+// ST7789 170 x 320 display with no chip select line
+#define USER_SETUP_ID 210
+
+#define ST7789_DRIVER     // Configure all registers
+
+#define TFT_WIDTH  170
+#define TFT_HEIGHT 320
+
+//#define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
+//#define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red
+
+#define TFT_INVERSION_ON
+//#define TFT_INVERSION_OFF
+#define TFT_BACKLIGHT_ON 1
+
+#define TFT_BL     15   // LED back-light
+#define TFT_MISO   -1   // Not connected
+#define TFT_MOSI   11
+#define TFT_SCLK   12
+#define TFT_CS     10 
+#define TFT_DC     13
+#define TFT_RST    9 // Connect reset to ensure display initialises
+
+#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
+#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
+#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
+#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
+#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
+#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
+//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
+#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
+
+#define SMOOTH_FONT
+
+
+// #define SPI_FREQUENCY  27000000
+#define SPI_FREQUENCY  40000000
+
+#define SPI_READ_FREQUENCY  20000000
+
+#define SPI_TOUCH_FREQUENCY  2500000
+
+// #define SUPPORT_TRANSACTIONS
\ No newline at end of file