Bodmer/TFT_eSPI
1
0
Fork 1
mirror of https://github.com/Bodmer/TFT_eSPI.git synced 2025-08-05 21:54:42 +02:00
Code Issues Packages Projects Releases Wiki Activity

Remove example

Browse Source 
The use of a setup file in sketches only works in certain circumstances.
This commit is contained in:
Bodmer
2023-01-03 22:20:48 +00:00
parent 024453fc1e
commit 91b8e248d3
4 changed files with 0 additions and 78 deletions
Download Patch File Download Diff File Expand all files Collapse all files

26
examples/Generic/Sketch_with_tft_setup/Read_Me.ino
View File

@@ -1,26 +0,0 @@
/*
It is possible to bypass the blockage put in place by the Arduino IDE so that a setup file can be included
by a sketch.
The procedure is as follows:
1. Find the folder containing the boards.txt file for the processor board package you are using. To do this
click the IDE menu "File->Preferences". At the bottom of that window click the link to the preferences.txt
file. This will open a folder. Navigate to find the folder containing the "boards.txt" file for the
processor you are using. Example paths for RP2040 and ESP32 are:
C:\Users\xxxxx\AppData\Local\Arduino15\packages\rp2040\hardware\rp2040\2.5.2
C:\Users\xxxxx\AppData\Local\Arduino15\packages\esp32\hardware\esp32\2.0.4
2. Copy the platform.local.txt file to that folder. A copy of the "platform.local.txt" is in this sketch
folder, press Ctrl+K to open the folder.
3. Close the Arduino IDE and open it again so the added file is recognised.
4. This step is already done in this sketch, but to adapt you own sketches, open the sketch and add a
new tab, "tft_setup.h" in the main sketch, put all the tft library setup information in that header.
The tab header name must be tft_setup.h
IMPORTANT: You will need to remember to add the platform.local.txt file again if you upgrade the IDE or
the board package version. Note that the file must be added to each processor board package you are using.
*/

19
examples/Generic/Sketch_with_tft_setup/Sketch_with_tft_setup.ino
View File

@@ -1,19 +0,0 @@
// THIS SKETCH IS A TEMPLATE EXAMPLE ONLY AND IS NOT INTENDED TO BE RUN UNLESS MODIFIED!
// See ReadMe tab for instructions to add a "user setup" configuration file to your sketch
#include <SPI.h>
#include <TFT_eSPI.h> // Hardware-specific library
TFT_eSPI tft = TFT_eSPI(); // Invoke custom library
void setup(void) {
tft.init();
tft.fillScreen(TFT_BLACK);
tft.setCursor(0, 0, 4);
tft.setTextColor(TFT_WHITE, TFT_BLACK);
tft.println("Hello World");
}
void loop() {
}

1
examples/Generic/Sketch_with_tft_setup/platform.local.txt
View File

@@ -1 +0,0 @@
build.extra_flags=-I{build.source.path}

32
examples/Generic/Sketch_with_tft_setup/tft_setup.h
View File

@@ -1,32 +0,0 @@
// This is a configuration setup file example for an RP2040 processor
// Adapt as required for your own hardware configuration
#define RP2040_PIO_SPI
#define GC9A01_DRIVER
#define TFT_WIDTH 240
#define TFT_HEIGHT 240
#define TFT_MOSI 10
#define TFT_MISO 9
#define TFT_SCLK 8
#define TFT_CS 7 // Chip select control pin
#define TFT_DC 4 // Data Command control pin
#define TFT_RST 5 // Reset pin (could connect to Arduino RESET pin)
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
#define SMOOTH_FONT
#define SPI_FREQUENCY 66000000
#define SPI_READ_FREQUENCY 20000000
#define SPI_TOUCH_FREQUENCY 2500000