diff --git a/Extensions/Smooth_font.cpp b/Extensions/Smooth_font.cpp
index 6e5f89d..ca1cb63 100644
--- a/Extensions/Smooth_font.cpp
+++ b/Extensions/Smooth_font.cpp
@@ -8,9 +8,18 @@
 
 /***************************************************************************************
 ** Function name:           loadFont
-** Description:             loads parameters from a new font vlw file stored in SPIFFS
+** Description:             loads parameters from a new font vlw file
 *************************************************************************************x*/
-void TFT_eSPI::loadFont(String fontName)
+void TFT_eSPI::loadFont(String fontName, fs::FS &ffs)
+{
+  fontFS = ffs;
+  loadFont(fontName, false);
+}
+/***************************************************************************************
+** Function name:           loadFont
+** Description:             loads parameters from a new font vlw file
+*************************************************************************************x*/
+void TFT_eSPI::loadFont(String fontName, bool flash)
 {
   /*
     The vlw font format does not appear to be documented anywhere, so some reverse
@@ -74,15 +83,19 @@ void TFT_eSPI::loadFont(String fontName)
 
   */
 
-   unloadFont();
-    
+  spiffs = flash;
+
+  if(spiffs) fontFS = SPIFFS;
+
+  unloadFont();
+
   // Avoid a crash on the ESP32 if the file does not exist
-  if (SPIFFS.exists("/" + fontName + ".vlw") == false) {
+  if (fontFS.exists("/" + fontName + ".vlw") == false) {
     Serial.println("Font file " + fontName + " not found!");
     return;
   }
 
-  fontFile = SPIFFS.open( "/" + fontName + ".vlw", "r");
+  fontFile = fontFS.open( "/" + fontName + ".vlw", "r");
 
   if(!fontFile) return;
 
@@ -120,13 +133,28 @@ void TFT_eSPI::loadMetrics(uint16_t gCount)
   uint32_t headerPtr = 24;
   uint32_t bitmapPtr = 24 + gCount * 28;
 
-  gUnicode  = (uint16_t*)malloc( gCount * 2); // Unicode 16 bit Basic Multilingual Plane (0-FFFF)
-  gHeight   =  (uint8_t*)malloc( gCount );    // Height of glyph
-  gWidth    =  (uint8_t*)malloc( gCount );    // Width of glyph
-  gxAdvance =  (uint8_t*)malloc( gCount );    // xAdvance - to move x cursor
-  gdY       =  (int16_t*)malloc( gCount * 2); // offset from bitmap top edge from lowest point in any character
-  gdX       =   (int8_t*)malloc( gCount );    // offset for bitmap left edge relative to cursor X
-  gBitmap   = (uint32_t*)malloc( gCount * 4); // seek pointer to glyph bitmap in SPIFFS file
+#if defined (ESP32) && defined (CONFIG_SPIRAM_SUPPORT)
+  if ( psramFound() )
+  {
+    gUnicode  = (uint16_t*)ps_malloc( gCount * 2); // Unicode 16 bit Basic Multilingual Plane (0-FFFF)
+    gHeight   =  (uint8_t*)ps_malloc( gCount );    // Height of glyph
+    gWidth    =  (uint8_t*)ps_malloc( gCount );    // Width of glyph
+    gxAdvance =  (uint8_t*)ps_malloc( gCount );    // xAdvance - to move x cursor
+    gdY       =  (int16_t*)ps_malloc( gCount * 2); // offset from bitmap top edge from lowest point in any character
+    gdX       =   (int8_t*)ps_malloc( gCount );    // offset for bitmap left edge relative to cursor X
+    gBitmap   = (uint32_t*)ps_malloc( gCount * 4); // seek pointer to glyph bitmap in the file
+  }
+  else
+#endif
+  {
+    gUnicode  = (uint16_t*)malloc( gCount * 2); // Unicode 16 bit Basic Multilingual Plane (0-FFFF)
+    gHeight   =  (uint8_t*)malloc( gCount );    // Height of glyph
+    gWidth    =  (uint8_t*)malloc( gCount );    // Width of glyph
+    gxAdvance =  (uint8_t*)malloc( gCount );    // xAdvance - to move x cursor
+    gdY       =  (int16_t*)malloc( gCount * 2); // offset from bitmap top edge from lowest point in any character
+    gdX       =   (int8_t*)malloc( gCount );    // offset for bitmap left edge relative to cursor X
+    gBitmap   = (uint32_t*)malloc( gCount * 4); // seek pointer to glyph bitmap in the file
+  }
 
 #ifdef SHOW_ASCENT_DESCENT
   Serial.print("ascent  = "); Serial.println(gFont.ascent);
@@ -456,7 +484,19 @@ void TFT_eSPI::drawGlyph(uint16_t code)
 
     for (int y = 0; y < gHeight[gNum]; y++)
     {
-      fontFile.read(pbuffer, gWidth[gNum]); //<//
+      if (spiffs)
+      {
+        fontFile.read(pbuffer, gWidth[gNum]);
+        //Serial.println("SPIFFS");
+      }
+      else
+      {
+        endWrite();    // Release SPI for SD card transaction
+        fontFile.read(pbuffer, gWidth[gNum]);
+        startWrite();  // Re-start SPI for TFT transaction
+        //Serial.println("Not SPIFFS");
+      }
+
       for (int x = 0; x < gWidth[gNum]; x++)
       {
         uint8_t pixel = pbuffer[x]; //<//
@@ -486,6 +526,7 @@ void TFT_eSPI::drawGlyph(uint16_t code)
     }
 
     cursor_x += gxAdvance[gNum];
+    endWrite();
   }
   else
   {
@@ -493,8 +534,6 @@ void TFT_eSPI::drawGlyph(uint16_t code)
     drawRect(cursor_x, cursor_y + gFont.maxAscent - gFont.ascent, gFont.spaceWidth, gFont.ascent, fg);
     cursor_x += gFont.spaceWidth + 1;
   }
-
-  endWrite();
 }
 
 /***************************************************************************************
diff --git a/Extensions/Smooth_font.h b/Extensions/Smooth_font.h
index c1cc483..a7e2ca6 100644
--- a/Extensions/Smooth_font.h
+++ b/Extensions/Smooth_font.h
@@ -4,7 +4,8 @@
  public:
 
   // These are for the new antialiased fonts
-  void     loadFont(String fontName);
+  void     loadFont(String fontName, fs::FS &ffs);
+  void     loadFont(String fontName, bool flash = true);
   void     unloadFont( void );
   bool     getUnicodeIndex(uint16_t unicode, uint16_t *index);
 
@@ -14,9 +15,7 @@
 
   void     showFont(uint32_t td);
 
- fs::File   fontFile;
-
-  // This is for the whole font
+ // This is for the whole font
   typedef struct
   {
     uint16_t gCount;     // Total number of characters
@@ -40,8 +39,12 @@ fontMetrics gFont = { 0, 0, 0, 0, 0, 0, 0 };
   uint32_t* gBitmap = NULL;   //file pointer to greyscale bitmap
 
   bool     fontLoaded = false; // Flags when a anti-aliased font is loaded
+  fs::File fontFile;
 
- private:
+  private:
 
   void     loadMetrics(uint16_t gCount);
   uint32_t readInt32(void);
+
+  fs::FS   &fontFS = SPIFFS;
+  bool     spiffs = true;
\ No newline at end of file
diff --git a/TFT_Drivers/ST7789_2_Defines.h b/TFT_Drivers/ST7789_2_Defines.h
new file mode 100644
index 0000000..b777b69
--- /dev/null
+++ b/TFT_Drivers/ST7789_2_Defines.h
@@ -0,0 +1,143 @@
+// Change the width and height if required (defined in portrait mode)
+// or use the constructor to over-ride defaults
+#ifndef TFT_WIDTH
+  #define TFT_WIDTH  240
+#endif
+#ifndef TFT_HEIGHT
+  #define TFT_HEIGHT 320
+#endif
+
+#if (TFT_HEIGHT == 240) && (TFT_WIDTH == 240)
+  #define CGRAM_OFFSET
+#endif
+
+// Delay between some initialisation commands
+#define TFT_INIT_DELAY 0x80 // Not used unless commandlist invoked
+
+
+// Generic commands used by TFT_eSPI.cpp
+#define TFT_NOP     0x00
+#define TFT_SWRST   0x01
+
+#define TFT_SLPIN   0x10
+#define TFT_SLPOUT  0x11
+#define TFT_NORON   0x13
+
+#define TFT_INVOFF  0x20
+#define TFT_INVON   0x21
+#define TFT_DISPOFF 0x28
+#define TFT_DISPON  0x29
+#define TFT_CASET   0x2A
+#define TFT_PASET   0x2B
+#define TFT_RAMWR   0x2C
+#define TFT_RAMRD   0x2E
+#define TFT_MADCTL  0x36
+#define TFT_COLMOD  0x3A
+
+// Flags for TFT_MADCTL
+#define TFT_MAD_MY  0x80
+#define TFT_MAD_MX  0x40
+#define TFT_MAD_MV  0x20
+#define TFT_MAD_ML  0x10
+#define TFT_MAD_RGB 0x00
+#define TFT_MAD_BGR 0x08
+#define TFT_MAD_MH  0x04
+#define TFT_MAD_SS  0x02
+#define TFT_MAD_GS  0x01
+
+#ifdef TFT_RGB_ORDER
+  #if (TFT_RGB_ORDER == 1)
+    #define TFT_MAD_COLOR_ORDER TFT_MAD_RGB
+  #else
+    #define TFT_MAD_COLOR_ORDER TFT_MAD_BGR
+  #endif
+#else
+  #ifdef CGRAM_OFFSET
+    #define TFT_MAD_COLOR_ORDER TFT_MAD_BGR
+  #else
+    #define TFT_MAD_COLOR_ORDER TFT_MAD_RGB
+  #endif
+#endif
+
+#define TFT_IDXRD   0x00 // ILI9341 only, indexed control register read
+
+#define ST_CMD_DELAY   0x80    // special signifier for command lists
+#define ST7789_240x240_XSTART 0
+#define ST7789_240x240_YSTART 0
+
+// ST7789 specific commands used in init
+#define ST7789_NOP			0x00
+#define ST7789_SWRESET		0x01
+#define ST7789_RDDID		0x04
+#define ST7789_RDDST		0x09
+
+#define ST7789_RDDPM		0x0A      // Read display power mode
+#define ST7789_RDD_MADCTL	0x0B      // Read display MADCTL
+#define ST7789_RDD_COLMOD	0x0C      // Read display pixel format
+#define ST7789_RDDIM		0x0D      // Read display image mode
+#define ST7789_RDDSM		0x0E      // Read display signal mode
+#define ST7789_RDDSR		0x0F      // Read display self-diagnostic result (ST7789V)
+
+#define ST7789_SLPIN		0x10
+#define ST7789_SLPOUT		0x11
+#define ST7789_PTLON		0x12
+#define ST7789_NORON		0x13
+
+#define ST7789_INVOFF		0x20
+#define ST7789_INVON		0x21
+#define ST7789_GAMSET		0x26      // Gamma set
+#define ST7789_DISPOFF		0x28
+#define ST7789_DISPON		0x29
+#define ST7789_CASET		0x2A
+#define ST7789_RASET		0x2B
+#define ST7789_RAMWR		0x2C
+#define ST7789_RGBSET		0x2D      // Color setting for 4096, 64K and 262K colors
+#define ST7789_RAMRD		0x2E
+
+#define ST7789_PTLAR		0x30
+#define ST7789_VSCRDEF		0x33      // Vertical scrolling definition (ST7789V)
+#define ST7789_TEOFF		0x34      // Tearing effect line off
+#define ST7789_TEON			0x35      // Tearing effect line on
+#define ST7789_MADCTL		0x36      // Memory data access control
+#define ST7789_IDMOFF		0x38      // Idle mode off
+#define ST7789_IDMON		0x39      // Idle mode on
+#define ST7789_RAMWRC		0x3C      // Memory write continue (ST7789V)
+#define ST7789_RAMRDC		0x3E      // Memory read continue (ST7789V)
+#define ST7789_COLMOD		0x3A
+
+#define ST7789_RAMCTRL		0xB0      // RAM control
+#define ST7789_RGBCTRL		0xB1      // RGB control
+#define ST7789_PORCTRL		0xB2      // Porch control
+#define ST7789_FRCTRL1		0xB3      // Frame rate control
+#define ST7789_PARCTRL		0xB5      // Partial mode control
+#define ST7789_GCTRL		0xB7      // Gate control
+#define ST7789_GTADJ		0xB8      // Gate on timing adjustment
+#define ST7789_DGMEN		0xBA      // Digital gamma enable
+#define ST7789_VCOMS		0xBB      // VCOMS setting
+#define ST7789_LCMCTRL		0xC0      // LCM control
+#define ST7789_IDSET		0xC1      // ID setting
+#define ST7789_VDVVRHEN		0xC2      // VDV and VRH command enable
+#define ST7789_VRHS			0xC3      // VRH set
+#define ST7789_VDVSET		0xC4      // VDV setting
+#define ST7789_VCMOFSET		0xC5      // VCOMS offset set
+#define ST7789_FRCTR2		0xC6      // FR Control 2
+#define ST7789_CABCCTRL		0xC7      // CABC control
+#define ST7789_REGSEL1		0xC8      // Register value section 1
+#define ST7789_REGSEL2		0xCA      // Register value section 2
+#define ST7789_PWMFRSEL		0xCC      // PWM frequency selection
+#define ST7789_PWCTRL1		0xD0      // Power control 1
+#define ST7789_VAPVANEN		0xD2      // Enable VAP/VAN signal output
+#define ST7789_CMD2EN		0xDF      // Command 2 enable
+#define ST7789_PVGAMCTRL	0xE0      // Positive voltage gamma control
+#define ST7789_NVGAMCTRL	0xE1      // Negative voltage gamma control
+#define ST7789_DGMLUTR		0xE2      // Digital gamma look-up table for red
+#define ST7789_DGMLUTB		0xE3      // Digital gamma look-up table for blue
+#define ST7789_GATECTRL		0xE4      // Gate control
+#define ST7789_SPI2EN		0xE7      // SPI2 enable
+#define ST7789_PWCTRL2		0xE8      // Power control 2
+#define ST7789_EQCTRL		0xE9      // Equalize time control
+#define ST7789_PROMCTRL		0xEC      // Program control
+#define ST7789_PROMEN		0xFA      // Program mode enable
+#define ST7789_NVMSET		0xFC      // NVM setting
+#define ST7789_PROMACT		0xFE      // Program action
+
diff --git a/TFT_Drivers/ST7789_2_Init.h b/TFT_Drivers/ST7789_2_Init.h
new file mode 100644
index 0000000..3cd9630
--- /dev/null
+++ b/TFT_Drivers/ST7789_2_Init.h
@@ -0,0 +1,22 @@
+
+// This is the command sequence that initialises the ST7789 driver
+
+// Configure ST7789 display
+
+{
+static const uint8_t PROGMEM
+  st7789[] = {
+    8,
+    TFT_SLPOUT, TFT_INIT_DELAY, 255,
+    TFT_COLMOD, 1+TFT_INIT_DELAY, 0x55, 10,
+    TFT_MADCTL, 1, 0x00,
+    TFT_CASET, 4, 0x00, 0x00, 0x00, 0xF0,
+    TFT_PASET, 4, 0x00, 0x00, 0x00, 0xF0,
+    TFT_INVON, TFT_INIT_DELAY, 10,
+    TFT_NORON, TFT_INIT_DELAY, 10,
+    TFT_DISPON, TFT_INIT_DELAY, 255
+    };
+
+    commandList(st7789);
+}
+// End of ST7789 display configuration
\ No newline at end of file
diff --git a/TFT_Drivers/ST7789_2_Rotation.h b/TFT_Drivers/ST7789_2_Rotation.h
new file mode 100644
index 0000000..d25cc0c
--- /dev/null
+++ b/TFT_Drivers/ST7789_2_Rotation.h
@@ -0,0 +1,48 @@
+  // This is the command sequence that rotates the ST7789 driver coordinate frame
+
+  writecommand(TFT_MADCTL);
+  rotation = m % 4;
+  switch (rotation) {
+    case 0: // Portrait
+#ifdef CGRAM_OFFSET
+      colstart = 0;
+      rowstart = 0;
+#endif
+      writedata(TFT_MAD_COLOR_ORDER);
+
+      _width  = _init_width;
+      _height = _init_height;
+      break;
+
+    case 1: // Landscape (Portrait + 90)
+#ifdef CGRAM_OFFSET
+      colstart = 0;
+      rowstart = 0;
+#endif
+      writedata(TFT_MAD_MX | TFT_MAD_MV | TFT_MAD_COLOR_ORDER);
+
+      _width  = _init_height;
+      _height = _init_width;
+      break;
+
+    case 2: // Inverter portrait
+#ifdef CGRAM_OFFSET
+       colstart = 0;
+       rowstart = 80;
+#endif
+      writedata(TFT_MAD_MX | TFT_MAD_MY | TFT_MAD_COLOR_ORDER);
+
+      _width  = _init_width;
+      _height = _init_height;
+       break;
+    case 3: // Inverted landscape
+#ifdef CGRAM_OFFSET
+      colstart = 80;
+      rowstart = 0;
+#endif
+      writedata(TFT_MAD_MV | TFT_MAD_MY | TFT_MAD_COLOR_ORDER);
+
+      _width  = _init_height;
+      _height = _init_width;
+      break;
+  }
diff --git a/TFT_Drivers/ST7789_Init.h b/TFT_Drivers/ST7789_Init.h
index cad01a3..d6b0b11 100644
--- a/TFT_Drivers/ST7789_Init.h
+++ b/TFT_Drivers/ST7789_Init.h
@@ -23,6 +23,7 @@
 
   writecommand(ST7789_COLMOD);
   writedata(0x55);
+  delay(10);
 
   //--------------------------------ST7789V Frame rate setting----------------------------------//
   writecommand(ST7789_PORCTRL);
@@ -92,7 +93,7 @@
   writedata(0x1b);
   writedata(0x1e);
 
-  writecommand(ST7789_INVOFF);
+  writecommand(ST7789_INVON);
 
   writecommand(ST7789_CASET);    // Column address set
   writedata(0x00);
@@ -113,6 +114,7 @@
   spi_begin();
 
   writecommand(ST7789_DISPON);    //Display on
+  delay(120);
 
 #ifdef TFT_BL
   // Turn on the back-light LED
diff --git a/TFT_eSPI.cpp b/TFT_eSPI.cpp
index 19af227..bb3bfb8 100644
--- a/TFT_eSPI.cpp
+++ b/TFT_eSPI.cpp
@@ -21,11 +21,11 @@
     #ifdef USE_HSPI_PORT
       SPIClass spi = SPIClass(HSPI);
     #else // use default VSPI port
-      SPIClass spi = SPIClass(VSPI);
+      SPIClass& spi = SPI;
     #endif
   #endif
 #else // ESP8266
-  SPIClass spi = SPIClass();
+  SPIClass& spi = SPI;
 #endif
 
   // SUPPORT_TRANSACTIONS is mandatory for ESP32 so the hal mutex is toggled
@@ -228,6 +228,11 @@ TFT_eSPI::TFT_eSPI(int16_t w, int16_t h)
   _xpivot = 0;
   _ypivot = 0;
 
+  cspinmask = 0;
+  dcpinmask = 0;
+  wrpinmask = 0;
+  sclkpinmask = 0;
+
 #ifdef LOAD_GLCD
   fontsloaded  = 0x0002; // Bit 1 set
 #endif
@@ -281,19 +286,19 @@ void TFT_eSPI::init(uint8_t tc)
   if (_booted)
   {
 #if !defined (ESP32)
-  #ifdef TFT_CS
+  #if defined (TFT_CS) && (TFT_CS >= 0)
     cspinmask = (uint32_t) digitalPinToBitMask(TFT_CS);
   #endif
 
-  #ifdef TFT_DC
+  #if defined (TFT_DC) && (TFT_DC >= 0)
     dcpinmask = (uint32_t) digitalPinToBitMask(TFT_DC);
   #endif
   
-  #ifdef TFT_WR
+  #if defined (TFT_WR) && (TFT_WR >= 0)
     wrpinmask = (uint32_t) digitalPinToBitMask(TFT_WR);
   #endif
   
-  #ifdef TFT_SCLK
+  #if defined (TFT_SCLK) && (TFT_SCLK >= 0)
     sclkpinmask = (uint32_t) digitalPinToBitMask(TFT_SCLK);
   #endif
   
@@ -407,6 +412,9 @@ void TFT_eSPI::init(uint8_t tc)
 #elif defined (R61581_DRIVER)
     #include "TFT_Drivers/R61581_Init.h"
 
+#elif defined (ST7789_2_DRIVER)
+    #include "TFT_Drivers/ST7789_2_Init.h"
+
 #endif
 
 #ifdef TFT_INVERSION_ON
@@ -477,6 +485,9 @@ void TFT_eSPI::setRotation(uint8_t m)
 #elif defined (R61581_DRIVER)
     #include "TFT_Drivers/R61581_Rotation.h"
 
+#elif defined (ST7789_2_DRIVER)
+    #include "TFT_Drivers/ST7789_2_Rotation.h"
+
 #endif
 
   delayMicroseconds(10);
@@ -1561,7 +1572,7 @@ void TFT_eSPI::drawCircle(int32_t x0, int32_t y0, int32_t r, uint32_t color)
   int32_t  dy = r+r;
   int32_t  p  = -(r>>1);
 
-  spi_begin();
+  //spi_begin();          // Sprite class can use this function, avoiding spi_begin()
   inTransaction = true;
 
   // These are ordered to minimise coordinate changes in x or y
@@ -1598,7 +1609,7 @@ void TFT_eSPI::drawCircle(int32_t x0, int32_t y0, int32_t r, uint32_t color)
   }
 
   inTransaction = false;
-  spi_end();
+  spi_end();              // Does nothing if Sprite class uses this function
 }
 
 
@@ -1654,7 +1665,7 @@ void TFT_eSPI::fillCircle(int32_t x0, int32_t y0, int32_t r, uint32_t color)
   int32_t  dy = r+r;
   int32_t  p  = -(r>>1);
 
-  spi_begin();
+  //spi_begin();          // Sprite class can use this function, avoiding spi_begin()
   inTransaction = true;
 
   drawFastHLine(x0 - r, y0, dy+1, color);
@@ -1680,7 +1691,7 @@ void TFT_eSPI::fillCircle(int32_t x0, int32_t y0, int32_t r, uint32_t color)
   }
 
   inTransaction = false;  
-  spi_end();
+  spi_end();              // Does nothing if Sprite class uses this function
 }
 
 
@@ -1736,7 +1747,7 @@ void TFT_eSPI::drawEllipse(int16_t x0, int16_t y0, int32_t rx, int32_t ry, uint1
   int32_t fy2 = 4 * ry2;
   int32_t s;
 
-  spi_begin();
+  //spi_begin();          // Sprite class can use this function, avoiding spi_begin()
   inTransaction = true;
 
   for (x = 0, y = ry, s = 2*ry2+rx2*(1-2*ry); ry2*x <= rx2*y; x++)
@@ -1772,7 +1783,7 @@ void TFT_eSPI::drawEllipse(int16_t x0, int16_t y0, int32_t rx, int32_t ry, uint1
   }
 
   inTransaction = false;
-  spi_end();
+  spi_end();              // Does nothing if Sprite class uses this function
 }
 
 
@@ -1791,7 +1802,7 @@ void TFT_eSPI::fillEllipse(int16_t x0, int16_t y0, int32_t rx, int32_t ry, uint1
   int32_t fy2 = 4 * ry2;
   int32_t s;
 
-  spi_begin();
+  //spi_begin();          // Sprite class can use this function, avoiding spi_begin()
   inTransaction = true;
 
   for (x = 0, y = ry, s = 2*ry2+rx2*(1-2*ry); ry2*x <= rx2*y; x++)
@@ -1821,7 +1832,7 @@ void TFT_eSPI::fillEllipse(int16_t x0, int16_t y0, int32_t rx, int32_t ry, uint1
   }
 
   inTransaction = false;
-  spi_end();
+  spi_end();              // Does nothing if Sprite class uses this function
 }
 
 
@@ -1842,7 +1853,7 @@ void TFT_eSPI::fillScreen(uint32_t color)
 // Draw a rectangle
 void TFT_eSPI::drawRect(int32_t x, int32_t y, int32_t w, int32_t h, uint32_t color)
 {
-  spi_begin();
+  //spi_begin();          // Sprite class can use this function, avoiding spi_begin()
   inTransaction = true;
 
   drawFastHLine(x, y, w, color);
@@ -1852,7 +1863,7 @@ void TFT_eSPI::drawRect(int32_t x, int32_t y, int32_t w, int32_t h, uint32_t col
   drawFastVLine(x + w - 1, y+1, h-2, color);
 
   inTransaction = false;
-  spi_end();
+  spi_end();              // Does nothing if Sprite class uses this function
 }
 
 
@@ -1863,7 +1874,7 @@ void TFT_eSPI::drawRect(int32_t x, int32_t y, int32_t w, int32_t h, uint32_t col
 // Draw a rounded rectangle
 void TFT_eSPI::drawRoundRect(int32_t x, int32_t y, int32_t w, int32_t h, int32_t r, uint32_t color)
 {
-  spi_begin();
+  //spi_begin();          // Sprite class can use this function, avoiding spi_begin()
   inTransaction = true;
 
   // smarter version
@@ -1878,7 +1889,7 @@ void TFT_eSPI::drawRoundRect(int32_t x, int32_t y, int32_t w, int32_t h, int32_t
   drawCircleHelper(x + r    , y + h - r - 1, r, 8, color);
   
   inTransaction = false;
-  spi_end();
+  spi_end();              // Does nothing if Sprite class uses this function
 }
 
 
@@ -1889,7 +1900,7 @@ void TFT_eSPI::drawRoundRect(int32_t x, int32_t y, int32_t w, int32_t h, int32_t
 // Fill a rounded rectangle, changed to horizontal lines (faster in sprites)
 void TFT_eSPI::fillRoundRect(int32_t x, int32_t y, int32_t w, int32_t h, int32_t r, uint32_t color)
 {
-  spi_begin();
+  //spi_begin();          // Sprite class can use this function, avoiding spi_begin()
   inTransaction = true;
 
   // smarter version
@@ -1900,7 +1911,7 @@ void TFT_eSPI::fillRoundRect(int32_t x, int32_t y, int32_t w, int32_t h, int32_t
   fillCircleHelper(x + r    , y + r, r, 2, w - r - r - 1, color);
   
   inTransaction = false;
-  spi_end();
+  spi_end();              // Does nothing if Sprite class uses this function
 }
 
 
@@ -1911,7 +1922,7 @@ void TFT_eSPI::fillRoundRect(int32_t x, int32_t y, int32_t w, int32_t h, int32_t
 // Draw a triangle
 void TFT_eSPI::drawTriangle(int32_t x0, int32_t y0, int32_t x1, int32_t y1, int32_t x2, int32_t y2, uint32_t color)
 {
-  spi_begin();
+  //spi_begin();          // Sprite class can use this function, avoiding spi_begin()
   inTransaction = true;
 
   drawLine(x0, y0, x1, y1, color);
@@ -1919,7 +1930,7 @@ void TFT_eSPI::drawTriangle(int32_t x0, int32_t y0, int32_t x1, int32_t y1, int3
   drawLine(x2, y2, x0, y0, color);
 
   inTransaction = false;
-  spi_end();
+  spi_end();              // Does nothing if Sprite class uses this function
 }
 
 
@@ -1953,7 +1964,7 @@ void TFT_eSPI::fillTriangle ( int32_t x0, int32_t y0, int32_t x1, int32_t y1, in
     return;
   }
 
-  spi_begin();
+  //spi_begin();          // Sprite class can use this function, avoiding spi_begin()
   inTransaction = true;
 
   int32_t
@@ -2000,7 +2011,7 @@ void TFT_eSPI::fillTriangle ( int32_t x0, int32_t y0, int32_t x1, int32_t y1, in
   }
 
   inTransaction = false;
-  spi_end();
+  spi_end();              // Does nothing if Sprite class uses this function
 }
 
 
@@ -2010,7 +2021,7 @@ void TFT_eSPI::fillTriangle ( int32_t x0, int32_t y0, int32_t x1, int32_t y1, in
 ***************************************************************************************/
 void TFT_eSPI::drawBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w, int16_t h, uint16_t color)
 {
-  spi_begin();
+  //spi_begin();          // Sprite class can use this function, avoiding spi_begin()
   inTransaction = true;
 
   int32_t i, j, byteWidth = (w + 7) / 8;
@@ -2024,7 +2035,7 @@ void TFT_eSPI::drawBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w
   }
 
   inTransaction = false;
-  spi_end();
+  spi_end();              // Does nothing if Sprite class uses this function
 }
 
 
@@ -2034,7 +2045,7 @@ void TFT_eSPI::drawBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w
 ***************************************************************************************/
 void TFT_eSPI::drawXBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w, int16_t h, uint16_t color)
 {
-  spi_begin();
+  //spi_begin();          // Sprite class can use this function, avoiding spi_begin()
   inTransaction = true;
 
   int32_t i, j, byteWidth = (w + 7) / 8;
@@ -2048,7 +2059,7 @@ void TFT_eSPI::drawXBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t
   }
 
   inTransaction = false;
-  spi_end();
+  spi_end();              // Does nothing if Sprite class uses this function
 }
 
 
@@ -2058,7 +2069,7 @@ void TFT_eSPI::drawXBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t
 ***************************************************************************************/
 void TFT_eSPI::drawXBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w, int16_t h, uint16_t color, uint16_t bgcolor)
 {
-  spi_begin();
+  //spi_begin();          // Sprite class can use this function, avoiding spi_begin()
   inTransaction = true;
 
   int32_t i, j, byteWidth = (w + 7) / 8;
@@ -2072,7 +2083,7 @@ void TFT_eSPI::drawXBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t
   }
 
   inTransaction = false;
-  spi_end();
+  spi_end();              // Does nothing if Sprite class uses this function
 }
 
 
@@ -2480,7 +2491,7 @@ void TFT_eSPI::drawChar(int32_t x, int32_t y, uint16_t c, uint32_t color, uint32
   }
   else
   {
-    spi_begin();
+    //spi_begin();          // Sprite class can use this function, avoiding spi_begin()
     inTransaction = true;
     for (int8_t i = 0; i < 6; i++ ) {
       uint8_t line;
@@ -2505,7 +2516,7 @@ void TFT_eSPI::drawChar(int32_t x, int32_t y, uint16_t c, uint32_t color, uint32
       }
     }
     inTransaction = false;
-    spi_end();
+    spi_end();              // Does nothing if Sprite class uses this function
   }
 
 //>>>>>>>>>>>>>>>>>>>>>>>>>>>
@@ -2519,7 +2530,7 @@ void TFT_eSPI::drawChar(int32_t x, int32_t y, uint16_t c, uint32_t color, uint32
     // Filter out bad characters not present in font
     if ((c >= pgm_read_word(&gfxFont->first)) && (c <= pgm_read_word(&gfxFont->last )))
     {
-      spi_begin();
+      //spi_begin();          // Sprite class can use this function, avoiding spi_begin()
       inTransaction = true;
 //>>>>>>>>>>>>>>>>>>>>>>>>>>>
 
@@ -2643,7 +2654,7 @@ void TFT_eSPI::drawChar(int32_t x, int32_t y, uint16_t c, uint32_t color, uint32
       }
 #endif
       inTransaction = false;
-      spi_end();
+      spi_end();              // Does nothing if Sprite class uses this function
     }
 #endif
 
@@ -3500,7 +3511,7 @@ void TFT_eSPI::pushColors(uint16_t *data, uint32_t len, bool swap)
 
 void TFT_eSPI::drawLine(int32_t x0, int32_t y0, int32_t x1, int32_t y1, uint32_t color)
 {
-  spi_begin();
+  //spi_begin();          // Sprite class can use this function, avoiding spi_begin()
   inTransaction = true;
   boolean steep = abs(y1 - y0) > abs(x1 - x0);
   if (steep) {
@@ -4278,7 +4289,7 @@ int16_t TFT_eSPI::drawChar(uint16_t uniCode, int32_t x, int32_t y, uint8_t font)
     if (x + width * textsize >= (int16_t)_width) return width * textsize ;
 
     if (textcolor == textbgcolor || textsize != 1) {
-      spi_begin();
+      //spi_begin();          // Sprite class can use this function, avoiding spi_begin()
       inTransaction = true;
 
       for (int32_t i = 0; i < height; i++)
@@ -5178,6 +5189,18 @@ void writeBlock(uint16_t color, uint32_t repeat)
 #endif
 
 
+/***************************************************************************************
+** Function name:           getSPIinstance
+** Description:             Get the instance of the SPI class (for ESP32 only)
+***************************************************************************************/
+#ifndef ESP32_PARALLEL
+SPIClass& TFT_eSPI::getSPIinstance(void)
+{
+  return spi;
+}
+#endif
+
+
 /***************************************************************************************
 ** Function name:           getSetup
 ** Description:             Get the setup details for diagnostic and sketch access
diff --git a/TFT_eSPI.h b/TFT_eSPI.h
index cc937d7..0756d39 100644
--- a/TFT_eSPI.h
+++ b/TFT_eSPI.h
@@ -37,7 +37,7 @@
   #define SPI_READ_FREQUENCY SPI_FREQUENCY
 #endif
 
-#ifdef ST7789_DRIVER
+#if defined(ST7789_DRIVER) || defined(ST7789_2_DRIVER)
   #define TFT_SPI_MODE SPI_MODE3
 #else
   #define TFT_SPI_MODE SPI_MODE0
@@ -831,6 +831,8 @@ class TFT_eSPI : public Print {
 
   void     getSetup(setup_t& tft_settings); // Sketch provides the instance to populate
 
+  static   SPIClass& getSPIinstance(void);
+
   int32_t  cursor_x, cursor_y, padX;
   uint32_t textcolor, textbgcolor;
 
diff --git a/User_Setup.h b/User_Setup.h
index a963e3b..3f44644 100644
--- a/User_Setup.h
+++ b/User_Setup.h
@@ -25,14 +25,15 @@
 //#define ILI9481_DRIVER
 //#define ILI9486_DRIVER
 //#define ILI9488_DRIVER     // WARNING: Do not connect ILI9488 display SDO to MISO if other devices share the SPI bus (TFT SDO does NOT tristate when CS is high)
-//#define ST7789_DRIVER      // Define additional parameters below for this display
+//#define ST7789_DRIVER      // Full configuration option, define additional parameters below for this display
+//#define ST7789_2_DRIVER    // Minimal configuration option, define additional parameters below for this display
 //#define R61581_DRIVER
 
 // Some displays support SPI reads via the MISO pin, other displays have a single
 // bi-directional SDA pin and the library will try to read this via the MOSI line.
 // To use the SDA line for reading data from the TFT uncomment the following line:
 
-// #define TFT_SDA_READ      // This option if for ESP32 ONLY, tested with ST7789 display only
+// #define TFT_SDA_READ      // This option is for ESP32 ONLY, tested with ST7789 display only
 
 // For ST7789 ONLY, define the colour order IF the blue and red are swapped on your display
 // Try ONE option at a time to find the correct colour order for your display
diff --git a/User_Setup_Select.h b/User_Setup_Select.h
index 69d27a0..06568f1 100644
--- a/User_Setup_Select.h
+++ b/User_Setup_Select.h
@@ -39,13 +39,14 @@
 //#include <User_Setups/Setup15_HX8357D.h>           // Setup file configured for HX8357D (untested)
 //#include <User_Setups/Setup16_ILI9488_Parallel.h>  // Setup file for the ESP32 with parallel bus TFT
 //#include <User_Setups/Setup17_ePaper.h>            // Setup file for any Waveshare ePaper display
-//#include <User_Setups/Setup18_ST7789.h>            // Setup file configured for HX8357D (untested)
+//#include <User_Setups/Setup18_ST7789.h>            // Setup file configured for ST7789
 
 //#include <User_Setups/Setup20_ILI9488.h>           // Setup file for ESP8266 and ILI9488 SPI bus TFT
 //#include <User_Setups/Setup21_ILI9488.h>           // Setup file for ESP32 and ILI9488 SPI bus TFT
 
 //#include <User_Setups/Setup22_TTGO_T4.h>           // Setup file for ESP32 and TTGO T4 (BTC) ILI9341 SPI bus TFT
 //#include <User_Setups/Setup23_TTGO_TM.h>           // Setup file for ESP32 and TTGO TM ST7789 SPI bus TFT
+//#include <User_Setups/Setup24_ST7789.h>            // Setup file configured for ST7789 240 x 240
 
 //#include <User_Setups/Setup43_ST7735.h>              // Setup file configured for my ST7735S 80x160
 
@@ -106,6 +107,9 @@
 #elif defined (R61581_DRIVER)
      #include "TFT_Drivers/R61581_Defines.h"
      #define  TFT_DRIVER 0x6158
+#elif defined (ST7789_2_DRIVER)
+     #include "TFT_Drivers/ST7789_2_Defines.h"
+     #define  TFT_DRIVER 0x778B
 #elif defined (XYZZY_DRIVER)  // <<<<<<<<<<<<<<<<<<<<<<<< ADD NEW DRIVER HERE
      #include "TFT_Drivers/XYZZY_Defines.h"
      #define  TFT_DRIVER 0x0000
diff --git a/User_Setups/Setup10_RPi_touch_ILI9486.h b/User_Setups/Setup10_RPi_touch_ILI9486.h
index 8e59a6b..ffe2f71 100644
--- a/User_Setups/Setup10_RPi_touch_ILI9486.h
+++ b/User_Setups/Setup10_RPi_touch_ILI9486.h
@@ -23,7 +23,7 @@
 #define SMOOTH_FONT
 
 
-#define SPI_FREQUENCY  20000000
+#define SPI_FREQUENCY  16000000
 
 #define SPI_TOUCH_FREQUENCY  2500000
 
diff --git a/User_Setups/Setup18_ST7789.h b/User_Setups/Setup18_ST7789.h
index 25d57a3..1f9be03 100644
--- a/User_Setups/Setup18_ST7789.h
+++ b/User_Setups/Setup18_ST7789.h
@@ -2,8 +2,17 @@
 
 #define ST7789_DRIVER
 
+// #define TFT_SDA_READ      // This option is for ESP32 ONLY, tested with ST7789 display only
 
-#define TFT_SDA_READ
+// If colours are inverted (white shows as black) then uncomment one of the next
+// 2 lines try both options, one of the options should correct the inversion.
+// #define TFT_INVERSION_ON
+// #define TFT_INVERSION_OFF
+
+// For ST7789 ONLY, define the colour order IF the blue and red are swapped on your display
+// Try ONE option at a time to find the correct colour order for your display
+// #define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
+// #define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red
 
 
 // My ST7789 display has TCT_CS wired permananently low so the pin is not defined here
diff --git a/User_Setups/Setup21_ILI9488.h b/User_Setups/Setup21_ILI9488.h
index 1a39a02..358eef4 100644
--- a/User_Setups/Setup21_ILI9488.h
+++ b/User_Setups/Setup21_ILI9488.h
@@ -2,6 +2,7 @@
 
 #define ILI9488_DRIVER
 
+//#define TFT_INVERSION_OFF
 
 #define TFT_MISO 19 // (leave TFT SDO disconnected if other SPI devices share MISO)
 #define TFT_MOSI 23
@@ -27,4 +28,7 @@
 // #define SPI_FREQUENCY  40000000
 // #define SPI_FREQUENCY  80000000
 
+// Optional reduced SPI frequency for reading TFT
+#define SPI_READ_FREQUENCY  16000000
+
 #define SPI_TOUCH_FREQUENCY  2500000
diff --git a/User_Setups/Setup24_ST7789.h b/User_Setups/Setup24_ST7789.h
new file mode 100644
index 0000000..d75b743
--- /dev/null
+++ b/User_Setups/Setup24_ST7789.h
@@ -0,0 +1,53 @@
+// ST7789 240 x 240 display with no chip select line
+
+#define ST7789_DRIVER     // Configure all registers
+
+#define TFT_WIDTH  240
+#define TFT_HEIGHT 240
+
+//#define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
+//#define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red
+
+//#define TFT_INVERSION_ON
+//#define TFT_INVERSION_OFF
+
+// DSTIKE stepup
+//#define TFT_DC    23
+//#define TFT_RST   32
+//#define TFT_MOSI  26
+//#define TFT_SCLK  27
+
+// Generic ESP32 setup
+//#define TFT_MISO 19
+//#define TFT_MOSI 23
+//#define TFT_SCLK 18
+//#define TFT_CS    -1 // Not connected
+//#define TFT_DC    2
+//#define TFT_RST   4  // Connect reset to ensure display initialises
+
+// For NodeMCU - use pin numbers in the form PIN_Dx where Dx is the NodeMCU pin designation
+#define TFT_CS   -1      // Define as not used
+#define TFT_DC   PIN_D3  // Data Command control pin
+#define TFT_RST  PIN_D4  // Reset pin (could connect to NodeMCU RST, see next line)
+
+
+#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
+#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
+#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
+#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
+#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
+#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
+//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
+#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
+
+#define SMOOTH_FONT
+
+
+// #define SPI_FREQUENCY  27000000
+#define SPI_FREQUENCY  40000000
+
+#define SPI_READ_FREQUENCY  20000000
+
+#define SPI_TOUCH_FREQUENCY  2500000
+
+// #define SUPPORT_TRANSACTIONS
\ No newline at end of file
diff --git a/User_Setups/SetupX_Template.h b/User_Setups/SetupX_Template.h
index aa5037a..534a634 100644
--- a/User_Setups/SetupX_Template.h
+++ b/User_Setups/SetupX_Template.h
@@ -25,7 +25,8 @@
 //#define ILI9481_DRIVER
 //#define ILI9486_DRIVER
 //#define ILI9488_DRIVER     // WARNING: Do not connect ILI9488 display SDO to MISO if other devices share the SPI bus (TFT SDO does NOT tristate when CS is high)
-//#define ST7789_DRIVER      // Define additional parameters below for this display
+//#define ST7789_DRIVER      // Full configuration option, define additional parameters below for this display
+//#define ST7789_2_DRIVER    // Minimal configuration option, define additional parameters below for this display
 //#define R61581_DRIVER
 
 // Some displays support SPI reads via the MISO pin, other displays have a single
@@ -37,8 +38,8 @@
 // For ST7789 ONLY, define the colour order IF the blue and red are swapped on your display
 // Try ONE option at a time to find the correct colour order for your display
 
-//  #define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
-//  #define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red
+// #define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
+// #define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red
 
 // For M5Stack ESP32 module with integrated ILI9341 display ONLY, remove // in line below
 
diff --git a/examples/Smooth Fonts/ESP32_Smooth_Font_SD/ESP32_Smooth_Font_SD.ino b/examples/Smooth Fonts/ESP32_Smooth_Font_SD/ESP32_Smooth_Font_SD.ino
new file mode 100644
index 0000000..c6dbb19
--- /dev/null
+++ b/examples/Smooth Fonts/ESP32_Smooth_Font_SD/ESP32_Smooth_Font_SD.ino	
@@ -0,0 +1,174 @@
+/*
+  Sketch to demonstrate using the print class with smooth fonts
+  that are saved onto an SD Card accessed by the SD library.
+
+  For ESP32 only, GPIO 5 must be used for SD chip select.
+  This method of storing the fonts is NOT compatible with the ESP8266.
+
+  Sketch is written for a 240 x 320 display
+
+  Load the font file onto the root directory of the SD Card.  The font files
+  used by this sketch can be found in the Data folder, press Ctrl+K to see it.
+
+  The library supports 16 bit unicode characters:
+  https://en.wikipedia.org/wiki/Unicode_font
+
+  The characters supported are in the in the Basic Multilingal Plane:
+  https://en.wikipedia.org/wiki/Plane_(Unicode)#Basic_Multilingual_Plane
+
+  Make sure all the display driver and pin connenctions are correct by
+  editting the User_Setup.h file in the TFT_eSPI library folder.
+
+  #########################################################################
+  ###### DON'T FORGET TO UPDATE THE User_Setup.h FILE IN THE LIBRARY ######
+  #########################################################################
+*/
+
+// Font file is stored on SD card
+#include <SD.h>
+
+// Graphics and font library
+#include <TFT_eSPI.h>
+#include <SPI.h>
+
+TFT_eSPI tft = TFT_eSPI();  // Invoke library
+
+// -------------------------------------------------------------------------
+// Setup
+// -------------------------------------------------------------------------
+void setup(void) {
+  Serial.begin(115200); // Used for messages
+
+  // Initialise the SD library before the TFT so the chip select is defined
+  if (!SD.begin()) {
+    Serial.println("Card Mount Failed");
+    return;
+  }
+  uint8_t cardType = SD.cardType();
+
+  if (cardType == CARD_NONE) {
+    Serial.println("No SD card attached");
+    return;
+  }
+
+  Serial.print("SD Card Type: ");
+  if (cardType == CARD_MMC) {
+    Serial.println("MMC");
+  } else if (cardType == CARD_SD) {
+    Serial.println("SDSC");
+  } else if (cardType == CARD_SDHC) {
+    Serial.println("SDHC");
+  } else {
+    Serial.println("UNKNOWN");
+  }
+
+  uint64_t cardSize = SD.cardSize() / (1024 * 1024);
+  Serial.printf("SD Card Size: %lluMB\n", cardSize);
+
+  // Initialise the TFT after the SD card!
+  tft.init();
+  tft.setRotation(1);
+  tft.fillScreen(TFT_BLACK);
+
+  listDir(SD, "/", 0);
+
+  Serial.println("SD and TFT initialisation done.");
+}
+
+// -------------------------------------------------------------------------
+// Main loop
+// -------------------------------------------------------------------------
+void loop() {
+  // Wrap test at right and bottom of screen
+  tft.setTextWrap(true, true);
+
+  // Name of font file (library adds leading / and .vlw)
+  String fileName = "Final-Frontier-28";
+
+  // Font and background colour, background colour is used for anti-alias blending
+  tft.setTextColor(TFT_WHITE, TFT_BLACK);
+
+  // Load the font
+  tft.loadFont(fileName, SD);       // Use font stored on SD
+
+  // Display all characters of the font
+  tft.showFont(2000);
+
+ uint32_t dt = millis();
+
+ int count = 100;
+
+ while (count--)
+ {
+  // Set "cursor" at top left corner of display (0,0)
+  // (cursor will move to next line automatically during printing with 'tft.println'
+  //  or stay on the line is there is room for the text with tft.print)
+  tft.setCursor(0, 0);
+
+  // Set the font colour to be white with a black background, set text size multiplier to 1
+  tft.setTextColor(TFT_WHITE, TFT_BLACK);
+
+  // We can now plot text on screen using the "print" class
+  tft.println("Hello World!");
+
+  // Set the font colour to be yellow
+  tft.setTextColor(TFT_YELLOW, TFT_BLACK);
+  tft.println(1234.56);
+
+  // Set the font colour to be red
+  tft.setTextColor(TFT_RED, TFT_BLACK);
+  tft.println((uint32_t)3735928559, HEX); // Should print DEADBEEF
+
+  // Set the font colour to be green with black background
+  tft.setTextColor(TFT_GREEN, TFT_BLACK);
+  tft.println("Anti-aliased font!");
+  tft.println("");
+
+  // Test some print formatting functions
+  float fnumber = 123.45;
+
+  // Set the font colour to be blue
+  tft.setTextColor(TFT_BLUE, TFT_BLACK);
+  tft.print("Float = ");       tft.println(fnumber);           // Print floating point number
+  tft.print("Binary = ");      tft.println((int)fnumber, BIN); // Print as integer value in binary
+  tft.print("Hexadecimal = "); tft.println((int)fnumber, HEX); // Print as integer number in Hexadecimal
+ }
+
+ Serial.println(millis()-dt);
+ 
+  // Unload the font to recover used RAM
+  tft.unloadFont();
+
+  delay(10000);
+}
+
+void listDir(fs::FS &fs, const char * dirname, uint8_t levels){
+    Serial.printf("Listing directory: %s\n", dirname);
+
+    File root = fs.open(dirname);
+    if(!root){
+        Serial.println("Failed to open directory");
+        return;
+    }
+    if(!root.isDirectory()){
+        Serial.println("Not a directory");
+        return;
+    }
+
+    File file = root.openNextFile();
+    while(file){
+        if(file.isDirectory()){
+            Serial.print("  DIR : ");
+            Serial.println(file.name());
+            if(levels){
+                listDir(fs, file.name(), levels -1);
+            }
+        } else {
+            Serial.print("  FILE: ");
+            Serial.print(file.name());
+            Serial.print("  SIZE: ");
+            Serial.println(file.size());
+        }
+        file = root.openNextFile();
+    }
+}
diff --git a/examples/Smooth Fonts/ESP32_Smooth_Font_SD/data/Final-Frontier-28.vlw b/examples/Smooth Fonts/ESP32_Smooth_Font_SD/data/Final-Frontier-28.vlw
new file mode 100644
index 0000000..2872fd5
Binary files /dev/null and b/examples/Smooth Fonts/ESP32_Smooth_Font_SD/data/Final-Frontier-28.vlw differ
diff --git a/examples/Test and diagnostics/Colour_Test/Colour_Test.ino b/examples/Test and diagnostics/Colour_Test/Colour_Test.ino
index fb65bb4..ed7a061 100644
--- a/examples/Test and diagnostics/Colour_Test/Colour_Test.ino	
+++ b/examples/Test and diagnostics/Colour_Test/Colour_Test.ino	
@@ -78,7 +78,7 @@ void setup(void) {
   tft.setTextColor(TFT_BLUE, TFT_BLACK);
   tft.println("Blue text");
 
-  delay(10000);
+  delay(5000);
 
 }
 
@@ -104,7 +104,7 @@ void loop() {
   tft.setTextColor(TFT_BLUE, TFT_BLACK);
   tft.println("Blue text");
 
-  delay(10000);
+  delay(5000);
 
 
   // Binary inversion of colours
@@ -128,5 +128,5 @@ void loop() {
   tft.setTextColor(TFT_BLUE, TFT_BLACK);
   tft.println("Blue text");
 
-  delay(10000);
+  delay(5000);
 }
diff --git a/library.json b/library.json
index da5bb7c..1474e04 100644
--- a/library.json
+++ b/library.json
@@ -1,6 +1,6 @@
 {
   "name": "TFT_eSPI",
-  "version": "1.4.8",
+  "version": "1.4.9",
   "keywords": "tft, ePaper, display, ESP8266, NodeMCU, ESP32, M5Stack, ILI9341, ST7735, ILI9163, S6D02A1, ILI9486, ST7789",
   "description": "A TFT and ePaper SPI graphics library for ESP8266 and ESP32",
   "repository":
diff --git a/library.properties b/library.properties
index a1b8621..a8b48c7 100644
--- a/library.properties
+++ b/library.properties
@@ -1,5 +1,5 @@
 name=TFT_eSPI
-version=1.4.8
+version=1.4.9
 author=Bodmer
 maintainer=Bodmer
 sentence=A fast TFT graphics library for ESP8266 and ESP32 processors for the Arduino IDE