Bodmer/TFT_eSPI
1
0
Fork 1
mirror of https://github.com/Bodmer/TFT_eSPI.git synced 2025-08-03 20:54:42 +02:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #1675 from moion/add-1.69inch-TFT

Browse Source 
add ST7789 240X280 1.69inch TFT Setup file
This commit is contained in:
Bodmer
2022-03-01 23:29:58 +00:00
committed by GitHub
parent ec504067c1 5d9b09bc2d
commit a23a2df977
3 changed files with 78 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
TFT_Drivers/ST7789_Rotation.h
View File

@@ -10,6 +10,11 @@
colstart = 52; colstart = 52;
rowstart = 40; rowstart = 40;
} }
else if(_init_height == 280)
{
colstart = 0;
rowstart = 20;
}
else else
{ {
colstart = 0; colstart = 0;
@@ -29,6 +34,11 @@
colstart = 40; colstart = 40;
rowstart = 53; rowstart = 53;
} }
else if(_init_height == 280)
{
colstart = 20;
rowstart = 0;
}
else else
{ {
colstart = 0; colstart = 0;
@@ -48,6 +58,11 @@
colstart = 53; colstart = 53;
rowstart = 40; rowstart = 40;
} }
else if(_init_height == 280)
{
colstart = 0;
rowstart = 20;
}
else else
{ {
colstart = 0; colstart = 0;
@@ -66,6 +81,11 @@
colstart = 40; colstart = 40;
rowstart = 52; rowstart = 52;
} }
else if(_init_height == 280)
{
colstart = 20;
rowstart = 0;
}
else else
{ {
colstart = 80; colstart = 80;

2
User_Setup_Select.h
View File

@@ -105,6 +105,8 @@
//#include <User_Setups/Setup202_SSD1351_128.h> // Setup file for ESP32/ESP8266 based SSD1351 128x128 1.5inch OLED display //#include <User_Setups/Setup202_SSD1351_128.h> // Setup file for ESP32/ESP8266 based SSD1351 128x128 1.5inch OLED display
//#include <User_Setups/Setup203_ST7789.h> // Setup file for ESP32/ESP8266 based ST7789 240X280 1.69inch TFT
//#include <User_Setups/SetupX_Template.h> //#include <User_Setups/SetupX_Template.h>

56
User_Setups/Setup202_ST7789.h Normal file
View File

@@ -0,0 +1,56 @@
// ST7789 240 x 280 display with no chip select line
#define ST7789_DRIVER // Configure all registers
#define TFT_WIDTH 240
#define TFT_HEIGHT 280
#define CGRAM_OFFSET // Library will add offsets required
//#define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue
//#define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
//#define TFT_INVERSION_ON
//#define TFT_INVERSION_OFF
// DSTIKE stepup
//#define TFT_DC 23
//#define TFT_RST 32
//#define TFT_MOSI 26
//#define TFT_SCLK 27
// Generic ESP32 setup
//#define TFT_MISO 19
//#define TFT_MOSI 23
//#define TFT_SCLK 18
//#define TFT_CS -1 // Not connected
//#define TFT_DC 2
//#define TFT_RST 4 // Connect reset to ensure display initialises
// For NodeMCU - use pin numbers in the form PIN_Dx where Dx is the NodeMCU pin designation
#define TFT_CS -1 // Define as not used
#define TFT_DC PIN_D1 // Data Command control pin
//#define TFT_RST PIN_D4 // TFT reset pin (could connect to NodeMCU RST, see next line)
#define TFT_RST -1 // TFT reset pin connect to NodeMCU RST, must also then add 10K pull down to TFT SCK
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
#define SMOOTH_FONT
// #define SPI_FREQUENCY 27000000
#define SPI_FREQUENCY 40000000
#define SPI_READ_FREQUENCY 20000000
#define SPI_TOUCH_FREQUENCY 2500000
// #define SUPPORT_TRANSACTIONS