diff --git a/User_Setups/Setup207_LilyGo_T_HMI.h b/User_Setups/Setup207_LilyGo_T_HMI.h
new file mode 100644
index 0000000..8606ef3
--- /dev/null
+++ b/User_Setups/Setup207_LilyGo_T_HMI.h
@@ -0,0 +1,48 @@
+// ST7789 240 x 240 display with no chip select line
+#define USER_SETUP_ID 207
+
+#define ST7789_DRIVER // Configure all registers
+
+// #define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
+
+#define TFT_WIDTH 240
+#define TFT_HEIGHT 320
+
+#define CGRAM_OFFSET
+// #define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
+#define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red
+
+// #define TFT_INVERSION_ON
+#define TFT_INVERSION_OFF
+
+#define TFT_PARALLEL_8_BIT
+
+// The ESP32 and TFT the pins used for testing are:
+#define TFT_CS 6  // Chip select control pin (library pulls permanently low
+#define TFT_DC 7  // Data Command control pin
+#define TFT_RST -1 // Reset pin, toggles on startup
+
+#define TFT_WR 8 // Write strobe control pin
+#define TFT_RD -1 // Read strobe control pin
+
+#define TFT_D0 48 // Must use pins in the range 0-31 or alternatively 32-48
+#define TFT_D1 47 // so a single register write sets/clears all bits.
+#define TFT_D2 39 // Pins can be randomly assigned, this does not affect
+#define TFT_D3 40 // TFT screen update performance.
+#define TFT_D4 41
+#define TFT_D5 42
+#define TFT_D6 45
+#define TFT_D7 46
+
+#define TFT_BL 38 // LED back-light
+
+#define LOAD_GLCD  // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
+#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
+#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
+#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
+#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
+#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
+//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
+#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
+
+#define SMOOTH_FONT