diff --git a/TFT_Drivers/GC9A01_Rotation.h b/TFT_Drivers/GC9A01_Rotation.h
index a4c8f3e..48724e7 100644
--- a/TFT_Drivers/GC9A01_Rotation.h
+++ b/TFT_Drivers/GC9A01_Rotation.h
@@ -9,20 +9,48 @@
       writedata(TFT_MAD_BGR);
       _width  = _init_width;
       _height = _init_height;
+#ifdef CGRAM_OFFSET
+      if (_init_width == 128)
+      {
+        colstart = 2;
+        rowstart = 1;
+      }
+#endif    
       break;
     case 1: // Landscape (Portrait + 90)
       writedata(TFT_MAD_MX | TFT_MAD_MV | TFT_MAD_BGR);
       _width  = _init_height;
       _height = _init_width;
+#ifdef CGRAM_OFFSET
+      if (_init_width == 128)
+      {
+        colstart = 1;
+        rowstart = 2;
+      }
+#endif
       break;
     case 2: // Inverter portrait
       writedata(TFT_MAD_MX | TFT_MAD_MY | TFT_MAD_BGR);
       _width  = _init_width;
       _height = _init_height;
+#ifdef CGRAM_OFFSET
+      if (_init_width == 128)
+      {
+        colstart = 2;
+        rowstart = 1;
+      }
+#endif
       break;
     case 3: // Inverted landscape
       writedata(TFT_MAD_MV | TFT_MAD_MY | TFT_MAD_BGR);
       _width  = _init_height;
       _height = _init_width;
+#ifdef CGRAM_OFFSET
+      if (_init_width == 128)
+      {
+        colstart = 1;
+        rowstart = 2;
+      }
+#endif
       break;
   }
diff --git a/User_Setup_Select.h b/User_Setup_Select.h
index e1e5148..6c385e1 100644
--- a/User_Setup_Select.h
+++ b/User_Setup_Select.h
@@ -137,6 +137,7 @@
 
 //#include <User_Setups/Setup209_LilyGo_T_Dongle_S3.h>      // For the LilyGo T-Dongle S3 based ESP32 with ST7735 80 x 160 TFT
 // #include <User_Setups/Setup210_LilyGo_T_Embed_S3.h>         // For the LilyGo T-Embed S3 based ESP32S3 with ST7789 170 x 320 TFT
+// #include <User_Setups/Setup211_LilyGo_T_QT_Pro_S3.h>         // For the LilyGo T-QT Pro S3 based ESP32S3 with GC9A01 128 x 128 TFT
 
 //#include <User_Setups/Setup301_BW16_ST7735.h>            // Setup file for Bw16-based boards with ST7735 160 x 80 TFT
 
diff --git a/User_Setups/Setup211_LilyGo_T_QT_Pro_S3.h b/User_Setups/Setup211_LilyGo_T_QT_Pro_S3.h
new file mode 100644
index 0000000..3f41df0
--- /dev/null
+++ b/User_Setups/Setup211_LilyGo_T_QT_Pro_S3.h
@@ -0,0 +1,45 @@
+// GC9A01 128 x 128 display with no chip select line
+#define USER_SETUP_ID 211
+
+#define GC9A01_DRIVER     // Configure all registers
+
+#define TFT_WIDTH  128
+#define TFT_HEIGHT 128
+
+// #define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
+//#define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red
+
+// #define TFT_INVERSION_ON
+//#define TFT_INVERSION_OFF
+#define TFT_BACKLIGHT_ON 0
+#define CGRAM_OFFSET
+
+
+#define TFT_BL     10   // LED back-light
+#define TFT_MISO   -1   // Not connected
+#define TFT_MOSI   2
+#define TFT_SCLK   3
+#define TFT_CS     5 
+#define TFT_DC     6
+#define TFT_RST    1 // Connect reset to ensure display initialises
+
+#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
+#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
+#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
+#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
+#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
+#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
+//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
+#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
+
+#define SMOOTH_FONT
+
+
+// #define SPI_FREQUENCY  27000000
+#define SPI_FREQUENCY  40000000
+
+#define SPI_READ_FREQUENCY  20000000
+
+#define SPI_TOUCH_FREQUENCY  2500000
+
+// #define SUPPORT_TRANSACTIONS
\ No newline at end of file