Fix #417 and add for 135x240 display

Setup 135 is for TTGO T Display (ESP32)
Plus minor tweaks to avoid some warnings

Extensions/Sprite.cpp

@@ -464,7 +464,13 @@ void TFT_eSprite::pushSprite(int32_t x, int32_t y)
 {
   if (!_created) return;
 
-  if (_bpp == 16) _tft->pushImage(x, y, _iwidth, _iheight, _img );
+  if (_bpp == 16)
+  {
+    bool oldSwapBytes = _tft->getSwapBytes();
+    _tft->setSwapBytes(false);
+    _tft->pushImage(x, y, _iwidth, _iheight, _img );
+    _tft->setSwapBytes(oldSwapBytes);
+  }
 
   else _tft->pushImage(x, y, _dwidth, _dheight, _img8, (bool)(_bpp == 8));
 }
@@ -478,7 +484,13 @@ void TFT_eSprite::pushSprite(int32_t x, int32_t y, uint16_t transp)
 {
   if (!_created) return;
 
-  if (_bpp == 16) _tft->pushImage(x, y, _iwidth, _iheight, _img, transp );
+  if (_bpp == 16)
+  {
+    bool oldSwapBytes = _tft->getSwapBytes();
+    _tft->setSwapBytes(false);
+    _tft->pushImage(x, y, _iwidth, _iheight, _img, transp );
+    _tft->setSwapBytes(oldSwapBytes);
+  }
   else if (_bpp == 8)
   {
     transp = (uint8_t)((transp & 0xE000)>>8 | (transp & 0x0700)>>6 | (transp & 0x0018)>>3);
@@ -716,7 +728,7 @@ void  TFT_eSprite::pushImage(int32_t x, int32_t y, int32_t w, int32_t h, const u
     uint32_t ww =  (w+7) & 0xFFF8;
     for (int32_t yp = 0; yp<h; yp++)
     {
-      for (int32_t xp = 0; xp<ww; xp+=8)
+      for (uint32_t xp = 0; xp<ww; xp+=8)
       {
         uint8_t pbyte = pgm_read_byte(pdata++);
         for (uint8_t xc = 0; xc < 8; xc++)

TFT_eSPI.cpp

@@ -35,9 +35,9 @@
 
 // If it is a 16bit serial display we must transfer 16 bits every time
 #ifdef RPI_ILI9486_DRIVER
-  #define CMD_BITS 16-1
+  #define CMD_BITS (16-1)
 #else
-  #define CMD_BITS 8-1
+  #define CMD_BITS (8-1)
 #endif
 
 // Fast block write prototype

User_Setup_Select.h

@@ -49,6 +49,7 @@
 //#include <User_Setups/Setup22_TTGO_T4.h>           // Setup file for ESP32 and TTGO T4 (BTC) ILI9341 SPI bus TFT
 //#include <User_Setups/Setup23_TTGO_TM.h>           // Setup file for ESP32 and TTGO TM ST7789 SPI bus TFT
 //#include <User_Setups/Setup24_ST7789.h>            // Setup file configured for ST7789 240 x 240
+//#include <User_Setups/Setup25_TTGO_T_Display.h>    // Setup file for ESP32 and TTGO T-Display ST7789V SPI bus TFT
 
 //#include <User_Setups/Setup43_ST7735.h>            // Setup file configured for my ST7735S 80x160
 

User_Setups/Setup25_TTGO_T_Display.h

@@ -0,0 +1,38 @@
+// Setup for the TTGO T4 ("Bitcoin Tracker") ESP32 board with 2.2" ILI9341 display
+
+// See SetupX_Template.h for all options available
+
+#define ST7789_DRIVER
+
+#define TFT_WIDTH  135
+#define TFT_HEIGHT 240
+
+#define CGRAM_OFFSET      // Library will add offsets required
+
+//#define TFT_MISO -1
+
+#define TFT_MOSI            19
+#define TFT_SCLK            18
+#define TFT_CS              5
+#define TFT_DC              16
+#define TFT_RST             23
+
+#define TFT_BL          4  // Display backlight control pin
+
+#define TFT_BACKLIGHT_ON HIGH  // HIGH or LOW are options
+
+#define LOAD_GLCD
+#define LOAD_FONT2
+#define LOAD_FONT4
+#define LOAD_FONT6
+#define LOAD_FONT7
+#define LOAD_FONT8
+#define LOAD_GFXFF
+
+#define SMOOTH_FONT
+
+//#define SPI_FREQUENCY  27000000
+  #define SPI_FREQUENCY  40000000   // Maximum for ILI9341
+
+
+#define SPI_READ_FREQUENCY  6000000 // 6 MHz is the maximum SPI read speed for the ST7789V

examples/Sprite/One_bit_Yin_Yang/One_bit_Yin_Yang.ino

@@ -66,7 +66,7 @@ void loop() {
 // start_angle = 0 - 359
 // r = radius
 
-int yinyang(int x, int y, int start_angle, int r)
+void yinyang(int x, int y, int start_angle, int r)
 {
   int x1 = 0; // getCoord() will update these
   int y1 = 0;

library.json

@@ -1,6 +1,6 @@
 {
   "name": "TFT_eSPI",
-  "version": "1.4.16",
+  "version": "1.4.17",
   "keywords": "tft, ePaper, display, ESP8266, NodeMCU, ESP32, M5Stack, ILI9341, ST7735, ILI9163, S6D02A1, ILI9486, ST7789, RM68140",
   "description": "A TFT and ePaper SPI graphics library for ESP8266 and ESP32",
   "repository":

library.properties

@@ -1,5 +1,5 @@
 name=TFT_eSPI
-version=1.4.16
+version=1.4.17
 author=Bodmer
 maintainer=Bodmer
 sentence=A fast TFT graphics library for ESP8266 and ESP32 processors for the Arduino IDE