From c6773cc1f751a1437106f1af0b5be8b0d70bc312 Mon Sep 17 00:00:00 2001 From: Dennis Heynlein Date: Sat, 18 Sep 2021 21:32:13 +0200 Subject: [PATCH] Create Setup52_LilyPi_ST7796.h --- User_Setups/Setup52_LilyPi_ST7796.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 User_Setups/Setup52_LilyPi_ST7796.h diff --git a/User_Setups/Setup52_LilyPi_ST7796.h b/User_Setups/Setup52_LilyPi_ST7796.h new file mode 100644 index 0000000..c23ff91 --- /dev/null +++ b/User_Setups/Setup52_LilyPi_ST7796.h @@ -0,0 +1,26 @@ +#define ST7796_DRIVER + +#define TFT_BL 12 // LED back-light control pin +#define TFT_BACKLIGHT_ON HIGH // Level to turn ON back-light (HIGH or LOW) + +#define ESP32_DMA +#define TFT_MISO 23 +#define TFT_MOSI 19 +#define TFT_SCLK 18 +#define TFT_CS 5 // Chip select control pin +#define TFT_DC 27 // Data Command control pin +#define TFT_RST -1 // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST + +#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH +#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters +#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters +#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm +#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-. +#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-. +//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT +#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts + +#define SMOOTH_FONT + +#define SPI_FREQUENCY 40000000 +#define SPI_READ_FREQUENCY 20000000