diff --git a/User_Setups/Setup301_BW16_ST7735.h b/User_Setups/Setup301_BW16_ST7735.h new file mode 100644 index 0000000..47af4f8 --- /dev/null +++ b/User_Setups/Setup301_BW16_ST7735.h @@ -0,0 +1,47 @@ +#include "itoa.h" +#include + + +// Setup for ESP32 and ST7735 80 x 160 TFT +#define USER_SETUP_ID 43 +// See SetupX_Template.h for all options available + +#define ST7735_DRIVER + + +#define TFT_WIDTH 80 +#define TFT_HEIGHT 160 + + +#define ST7735_GREENTAB160x80 + +// For ST7735, ST7789 and ILI9341 ONLY, define the colour order IF the blue and red are swapped on your display +// Try ONE option at a time to find the correct colour order for your display + +// #define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue +// #define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red + +// Pin Mappings for BW16 board +#define TFT_MISO 11 +#define TFT_MOSI 12 +#define TFT_SCLK 10 +#define TFT_CS 9 // Chip select control pin +#define TFT_DC 8 // Data Command control pin +#define TFT_RST 6 // Reset pin (could connect to RST pin) + + +#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH +#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters +#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters +#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm +#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:. +#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-. +//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT +#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts + +#define SMOOTH_FONT + + +#define SPI_FREQUENCY 20000000 +//#define SPI_FREQUENCY 27000000 // Actually sets it to 26.67MHz = 80/3 +