diff --git a/User_Setups/ePaper_Template.h b/User_Setups/ePaper_Template.h
deleted file mode 100644
index e704621..0000000
--- a/User_Setups/ePaper_Template.h
+++ /dev/null
@@ -1,76 +0,0 @@
-//                            USER DEFINED SETTINGS
-//   Set driver type, fonts to be loaded, pins used and SPI control method etc
-//
-//   See the User_Setup_Select.h file if you wish to be able to define multiple
-//   setups and then easily select which setup file is used by the compiler.
-//
-//   If this file is edited correctly then all the library example sketches should
-//   run without the need to make any more changes for a particular hardware setup!
-
-// ##################################################################################
-//
-// Section 0. Call up the right driver file and any options for it
-//
-// ##################################################################################
-
-// Only define one driver, the other ones must be commented out
-#define EPD_DRIVER
-
-
-// ##################################################################################
-//
-// Section 1. Define the pins that are used to interface with the display here
-//
-// ##################################################################################
-
-// ePaper pins are not defined here - dummy set
-
-//#define TFT_CS  
-//#define TFT_DC  
-//#define TFT_RST
-
-
-// ##################################################################################
-//
-// Section 2. Not used
-//
-// ##################################################################################
-
-
-// ##################################################################################
-//
-// Section 3. Define the fonts that are to be used here
-//
-// ##################################################################################
-
-// Comment out the #defines below with // to stop that font being loaded
-// The ESP8366 and ESP32 have plenty of memory so commenting out fonts is not
-// normally necessary. If all fonts are loaded the extra FLASH space required is
-// about 17Kbytes. To save FLASH space only enable the fonts you need!
-
-#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
-#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
-#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
-#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
-//#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
-//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
-//#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
-#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
-
-// Comment out the #define below to stop the SPIFFS filing system and smooth font code being loaded
-// this will save ~20kbytes of FLASH
-#define SMOOTH_FONT
-
-// ##################################################################################
-//
-// Section 4. Not used
-//
-// ##################################################################################
-
-
-// ##################################################################################
-//
-// Section 5. Not used
-//
-// ##################################################################################
-
diff --git a/examples/ePaper/Floyd_Steinberg/Floyd_Steinberg_BMP.ino b/examples/ePaper/Floyd_Steinberg/Floyd_Steinberg_BMP.ino
index e78c741..a5cc6cb 100644
--- a/examples/ePaper/Floyd_Steinberg/Floyd_Steinberg_BMP.ino
+++ b/examples/ePaper/Floyd_Steinberg/Floyd_Steinberg_BMP.ino
@@ -165,6 +165,8 @@ void drawFSBmp(const char *filename, int16_t x, int16_t y) {
         // Read any line padding (saves a slow seek)
         if (padding) bmpFS.read(lineBuffer, padding);
       }
+    free(lineBuffer);
+    free(qerrBuffer);
     }
     else Serial.println("BMP format not recognized.");
   }