From f96efe5d593dfccf5a56c1340fe0bbb08fb90908 Mon Sep 17 00:00:00 2001
From: Bodmer <bodmer@anola.net>
Date: Mon, 12 Apr 2021 23:22:27 +0100
Subject: [PATCH] Remove Dxx pins for RP2040

Dxx pin names are not used with RPi Pico
Note: A0-3 are defined for pins 26-29
---
 Processors/TFT_eSPI_RP2040.h         | 39 +++-------------------------
 User_Setups/Setup60_RP2040_ILI9341.h | 12 ++++-----
 2 files changed, 9 insertions(+), 42 deletions(-)

diff --git a/Processors/TFT_eSPI_RP2040.h b/Processors/TFT_eSPI_RP2040.h
index 252a8da..1d9d89c 100644
--- a/Processors/TFT_eSPI_RP2040.h
+++ b/Processors/TFT_eSPI_RP2040.h
@@ -195,43 +195,10 @@
 ////////////////////////////////////////////////////////////////////////////////////////
 // Temporary to keep the "Arduino Mbed OS RP2040 Boards" support package happy
 ////////////////////////////////////////////////////////////////////////////////////////
-  #if defined(ARDUINO_ARCH_RP2040)
-    #ifndef D0
-      #define D0   0
-      #define D1   1
-      #define D2   2
-      #define D3   3
-      #define D4   4
-      #define D5   5
-      #define D6   6
-      #define D7   7
-      #define D8   8
-      #define D9   9
-      #define D10 10
-      #define D11 11
-      #define D12 12
-      #define D13 13
-      #define D14 14
-      #define D15 15
-      #define D16 16
-      #define D17 17
-      #define D18 18
-      #define D19 19
-      #define D20 20
-      #define D21 21
-      #define D22 22
-      #define D23 23
-      #define D24 24
-      #define D25 25
-      #define D26 26
-      #define D27 27
-      #define D28 28
-      #define D29 29
-      #define D30 30
-    #endif
+#if defined(ARDUINO_ARCH_RP2040)
 
-    #define ltoa itoa
+  #define ltoa itoa
 
-  #endif
+#endif
 
 #endif // Header end
diff --git a/User_Setups/Setup60_RP2040_ILI9341.h b/User_Setups/Setup60_RP2040_ILI9341.h
index 42402cb..43d9d80 100644
--- a/User_Setups/Setup60_RP2040_ILI9341.h
+++ b/User_Setups/Setup60_RP2040_ILI9341.h
@@ -122,12 +122,12 @@
 // to be toggled during setup, so in these cases the TFT_CS line must be defined and connected.
 
 // For the Pico use these #define lines
-#define TFT_MISO D0
-#define TFT_MOSI D3
-#define TFT_SCLK D2
-#define TFT_CS   D20  // Chip select control pin
-#define TFT_DC   D18  // Data Command control pin
-#define TFT_RST  D19  // Reset pin (could connect to Arduino RESET pin)
+#define TFT_MISO  0
+#define TFT_MOSI  3
+#define TFT_SCLK  2
+#define TFT_CS   20  // Chip select control pin
+#define TFT_DC   18  // Data Command control pin
+#define TFT_RST  19  // Reset pin (could connect to Arduino RESET pin)
 //#define TFT_BL     // LED back-light
 
 //#define TOUCH_CS 21     // Chip select pin (T_CS) of touch screen