Updated Sideboards (markdown)

Candas1
2022-07-04 09:03:15 +02:00
parent 4d750aa48d
commit 0a4a5b96c3

@@ -1,9 +1,11 @@
2 custom firmware are available for flashing the sideboards that are coming with the hoverboard mainboards.<br> 2 custom firmware are available for flashing the sideboards that are coming with the hoverboard mainboards.<br>
Those boards handle: Those boards handle:
* Leds to show battery status for any variant except the transpotter variant * Leds to show battery status for any variant except the transpotter variant
* Optical sensors that can let you turn on/off some of the features (e.g. [Hovercar variant](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Variant-HOVERCAR#features) ) * Optical sensors that can let you turn on/off some of the features (e.g. [Hovercar variant](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Variant-HOVERCAR#features) )
* RC receiver with iBUS protocol can be connected to the AUX serial Rx pin ([Hovercar variant](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Variant-HOVERCAR))
* An Inertial Measurement Unit that is meant to be used with the [Hoverboard variant](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Variant-HOVERBOARD) ( ⚠️ The balancing is not implemented yet ⚠️ ) * An Inertial Measurement Unit that is meant to be used with the [Hoverboard variant](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Variant-HOVERBOARD) ( ⚠️ The balancing is not implemented yet ⚠️ )
Those are not meant to control motors.
The [GD](https://github.com/EFeru/hoverboard-sideboard-hack-GD) firmware can be used on boards with following chips: The [GD](https://github.com/EFeru/hoverboard-sideboard-hack-GD) firmware can be used on boards with following chips:
* GD32F130C6T6 * GD32F130C6T6