From 0db9a02dbcabcb5db0c41e5a4ecc051e50f58aa7 Mon Sep 17 00:00:00 2001
From: Candas1 <candascraig@hotmail.com>
Date: Tue, 19 Jul 2022 22:18:19 +0200
Subject: [PATCH] Updated Variant PPM (markdown)

---
 Variant-PPM.md | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Variant-PPM.md b/Variant-PPM.md
index 34e8821..6dbc560 100644
--- a/Variant-PPM.md
+++ b/Variant-PPM.md
@@ -7,6 +7,8 @@ You can use CONTROL_PPM_LEFT instead if you need to use the left sensor cable.<b
 DEBUG_SERIAL will be automatically enabled on the opposite cable.<br>
 PPM_NUM_CHANNELS is the number of channels for PPM and is 6 by default. As an example Flysky fs-i6ab receiver is sending 8 channels even when used with a 6 channel transmitter<br>
 
+Please also check the [parameters](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Parameters) that are common to all the variants.
+
 ## :electric_plug: Wiring:
 * Connect your receiver VCC to 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator, ⚠️ Red wire from sensor cable delivers 15v !!!
 * Connect PPM port of your receiver to green wire on right sensor cable(shorter)