EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-05 10:34:28 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated Variant PWM (markdown)

Candas1
2022-04-29 14:58:12 +02:00
parent 2b5bce6e90
commit 0df69f48da
1 changed files with 4 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
Variant-PWM.md

@@ -20,5 +20,7 @@ Proceed with [calibration](https://github.com/EFeru/hoverboard-firmware-hack-FOC
## :toolbox: Troubleshooting: ## :toolbox: Troubleshooting:
If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Diagnostics) If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Diagnostics)
* Make sure you are using the sensor cable(left=CONTROL_PWM_lEFT or right=CONTROL_PWM_RIGHT) selected in config.h * Make sure you are using the sensor cable(left=CONTROL_PWM_LEFT or right=CONTROL_PWM_RIGHT) selected in config.h
* You might have a defective input, because of a fried resistor or MCU pin (e.g. [issue](https://github.com/EFeru/hoverboard-firmware-hack-FOC/issues/244)), you can configure the firmware to work on the other cable * You might have a defective input, because of a fried resistor or MCU pin (e.g. [issue](https://github.com/EFeru/hoverboard-firmware-hack-FOC/issues/244)), you can configure the firmware to work on the other cable
PWM is highly prone to noise : keep cables short, use 100nf capacitors, use shielded cable, use ferrites, stabilize voltage.