diff --git a/Variant-PPM.md b/Variant-PPM.md
index 4e20537..45ee754 100644
--- a/Variant-PPM.md
+++ b/Variant-PPM.md
@@ -8,13 +8,13 @@ Default number of channels for PPM in config.h is 6 (Successfully tested Flysky
 ⚠ Red wire from sensor cable delivers 15v !!!
 Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator.
 
-## Calibration:
-Proceed with [calibration](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Calibration) for better control.  
-
 ## Transmitter configuration:
 * Enable PPM 
 * Assign desired joystick to channel 1(steering) and channel 2(throttle)
 
+## Calibration:
+Proceed with [calibration](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Calibration) for better control.  
+
 ## Troubleshooting:
 
 If the board is beeping