From 11914c79b34696e97b421ca1b73dd16847f22b02 Mon Sep 17 00:00:00 2001 From: Candas1 Date: Tue, 15 Dec 2020 13:12:52 +0100 Subject: [PATCH] Updated Variant PPM (markdown) --- Variant-PPM.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Variant-PPM.md b/Variant-PPM.md index 4e20537..45ee754 100644 --- a/Variant-PPM.md +++ b/Variant-PPM.md @@ -8,13 +8,13 @@ Default number of channels for PPM in config.h is 6 (Successfully tested Flysky ⚠ Red wire from sensor cable delivers 15v !!! Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator. -## Calibration: -Proceed with [calibration](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Calibration) for better control. - ## Transmitter configuration: * Enable PPM * Assign desired joystick to channel 1(steering) and channel 2(throttle) +## Calibration: +Proceed with [calibration](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Calibration) for better control. + ## Troubleshooting: If the board is beeping