EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-04 01:54:27 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated Variant USART (markdown)

Candas1
2024-05-24 09:11:56 +02:00
parent 6ca40d87bc
commit 173fa1d676
1 changed files with 2 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
Variant-USART.md

@@ -71,4 +71,5 @@ If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hac
* Assuming RX or/and TX can be defective on your mainboard(port is defective on the MCU, 101 smd resistor is missing or has too high resistance), you can switch to other sensor cable in config.h * Assuming RX or/and TX can be defective on your mainboard(port is defective on the MCU, 101 smd resistor is missing or has too high resistance), you can switch to other sensor cable in config.h
* On some boards the wire colors might differ, try switching blue and green wires * On some boards the wire colors might differ, try switching blue and green wires
* Your Arduino TX/RX might not be working, you can verify that by trying with and FTDI and the Web tool to confirm the mainboard/firmware is not the issue * Your Arduino TX/RX might not be working, you can verify that by trying with and FTDI and the Web tool to confirm the mainboard/firmware is not the issue
* You might have to reduce the baud rate if you use software serial on the Arduino * You might have to reduce the baud rate if you use software serial on the Arduino
* If you have added capacitors for PWM/PPM, remove it