From 21101ca3dcbabb9e001d7332d96a0db41590041d Mon Sep 17 00:00:00 2001 From: Candas1 Date: Thu, 21 Apr 2022 09:59:07 +0200 Subject: [PATCH] Updated Variant PPM (markdown) --- Variant-PPM.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Variant-PPM.md b/Variant-PPM.md index 1789113..ffc12df 100644 --- a/Variant-PPM.md +++ b/Variant-PPM.md @@ -1,13 +1,13 @@ This variant can be used with PPM-SUM RC Receivers.
As opposed to PWM, it will send all channels on a single wire one after the other.
-## Configuration/Parameters +## :gear: Configuration/Parameters CONTROL_PPM_RIGHT is for the right sensor cable and is set by default to limit the noise as this cable is shorter.
You can use CONTROL_PPM_LEFT instead if you need to use the left sensor cable.
DEBUG_SERIAL will be automatically enabled on the opposite cable.
PPM_NUM_CHANNELS is the number of channels for PPM and is 6 by default. As an example Flysky fs-i6ab receiver is sending 8 channels even when used with a 6 channel transmitter
-## Wiring: +## :electric_plug: Wiring: * Connect your receiver VCC to 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator, ⚠️ Red wire from sensor cable delivers 15v !!! * Connect PPM port of your receiver to green wire on right sensor cable(shorter) * Connect the receiver to ground, ⚠️ On some boards, the black wire is 15v !!! Check with a multi-meter to make sure 15V and ground are not swapped @@ -17,10 +17,10 @@ PPM_NUM_CHANNELS is the number of channels for PPM and is 6 by default. As an ex * Enable PPM * Assign desired joystick to channel 1(steering) and channel 2(throttle) -## Calibration: +## :control_knobs: Calibration: Proceed with [calibration](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Input-Calibration) for better control. -## Troubleshooting: +## :toolbox: Troubleshooting: If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Diagnostics) * Check the number of channels, even if you transmitter only handles 6 channels, you receiver might transmit more channels