From 241d279295f9ef3188f34780cb4ed2d770c9fd8b Mon Sep 17 00:00:00 2001 From: Candas1 Date: Sat, 21 Nov 2020 11:47:53 +0100 Subject: [PATCH] Updated Variant IBUS (markdown) --- Variant-IBUS.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Variant-IBUS.md b/Variant-IBUS.md index b7abf7c..47ea275 100644 --- a/Variant-IBUS.md +++ b/Variant-IBUS.md @@ -5,13 +5,13 @@ Default number of channels for IBUS in config.h is 14. ## Wiring: * Connect green wire to IBUS port of your receiver. By default, IBUS variant is using right sensor cable(shorter) +⚠ Red wire from sensor cable delivers 15v !!! +Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator. + ## Troubleshooting: If the board is beeping * Check the number of channels, even if you transmitter only handles 6 channels, you receiver might transmit more channels * Make sure you enabled PPM on your transmitter * Make sure you are using the sensor cable(left or right) selected in config.h -* On some boards the wire colors might differ, try the blue wire - -⚠ Red wire from sensor cable delivers 15v !!! -Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator. \ No newline at end of file +* On some boards the wire colors might differ, try the blue wire \ No newline at end of file