From 2773cc9a6bef3532d18216330c940f20efa0e15e Mon Sep 17 00:00:00 2001 From: Candas1 Date: Thu, 19 Nov 2020 22:25:23 +0100 Subject: [PATCH] Created Setup current and speed limit (markdown) --- Setup-current-and-speed-limit.md | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 Setup-current-and-speed-limit.md diff --git a/Setup-current-and-speed-limit.md b/Setup-current-and-speed-limit.md new file mode 100644 index 0000000..38a67f0 --- /dev/null +++ b/Setup-current-and-speed-limit.md @@ -0,0 +1,6 @@ +* press the power button for more than 5 sec and immediately after the beep sound press one more time shortly +* move and hold the pots to a desired limit position for Current(INPUT1) and Speed(INPUT2), maximum being the values you have put in config.h +* press the power button to confirm or wait for the 10 sec timeout + +⚠The settings will be stored in flash memory and will be erased only if you fully delete memory before flashing.
+An alternative to bypass those settings is to change **FLASH_WRITE_KEY** in config.h. \ No newline at end of file