EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-05 10:34:28 +02:00
Code Issues Packages Projects Releases Wiki Activity

Created Variant Nunchuk (markdown)

Candas1
2020-11-21 11:53:11 +01:00
parent 098bff0f4e
commit 2809c336b8
1 changed files with 21 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

21
Variant-Nunchuk.md Normal file

@@ -0,0 +1,21 @@
This variant can be used with Wii Nunchuk (not the Wiimote).
## Wiring:
* Connect blue wire to SCL and green wire to SDA. Those are the wires from right sensor board cable.
* 100k Pull up resistors connected to 3.3v are recommended to prevent issues when nunchuk is disconnected
|SCL|--|3.3v|
|-|-|-|
|GND|--|SDA|
⚠ Red wire from sensor cable delivers 15v !!!
Use 3.3v from programming port or a voltage regulator.
Proceed with [calibration](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Calibration) for better control.
## Troubleshooting:
If the board is beeping
* On some boards the wire colors might differ, try switching blue and green cable