From 286c794f480fc9ec2ebad6e63d8f6afdaecd5174 Mon Sep 17 00:00:00 2001
From: Candas1 <candascraig@hotmail.com>
Date: Sat, 21 Nov 2020 12:36:22 +0100
Subject: [PATCH] Updated Variant USART (markdown)

---
 Variant-USART.md | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Variant-USART.md b/Variant-USART.md
index fb9e167..47d7f51 100644
--- a/Variant-USART.md
+++ b/Variant-USART.md
@@ -5,7 +5,6 @@ The example [Arduino sketch](https://github.com/EmanuelFeru/hoverboard-firmware-
 * Connect blue wire to RX, green wire to TX and black wire to GND of Arduino on right sensor cable(shorter)
 
 ⚠ Red wire from sensor cable delivers 15v !!!
-Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator.
 
 ## Calibration:
 Proceed with [calibration](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Calibration) for better control if you use input devices(e.g. Joystick or Throttle handle) on the Arduino.