diff --git a/Variant-TRANSPOTTER.md b/Variant-TRANSPOTTER.md
index a73942d..03b295a 100644
--- a/Variant-TRANSPOTTER.md
+++ b/Variant-TRANSPOTTER.md
@@ -7,6 +7,9 @@ Transpotter build from [Lucy](https://github.com/NiklasFauth/hoverboard-firmware
 * Connect the potentiometer/hall sensor to ground, ⚠️ On some boards, the black wire is 15v !!! Check with a multi-meter to make sure 15V and ground are not swapped
 * 100k Pull down resistors connected to ground are recommended to prevent issues when inputs are floating (wire is cut or disconnected) triggering ADC protection
 
+## :gear: Configuration/Parameters
+Voltage [Control Mode](https://github.com/EFeru/hoverboard-firmware-hack-FOC#foc-firmware) is used by default.<br>
+
 ## How To Use
 
 ### Power ON