EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-05 02:24:26 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated Variant PPM (markdown)

Candas1
2022-04-08 11:36:40 +02:00
parent 1ffa4ac92d
commit 2c002e9746
1 changed files with 2 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
Variant-PPM.md

@@ -8,12 +8,11 @@ DEBUG_SERIAL will be automatically enabled on the opposite cable.<br>
PPM_NUM_CHANNELS is the number of channels for PPM and is 6 by default. As an example Flysky fs-i6ab receiver is sending 8 channels even when used with a 6 channel transmitter<br>
## Wiring:
* Connect your receiver VCC to 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator, ⚠️ Red wire from sensor cable delivers 15v !!!
* Connect PPM port of your receiver to green wire on right sensor cable(shorter)
* Connect the receiver to ground, ⚠️ On some boards, the black wire is 15v !!! Check with a multi-meter to make sure 15V and ground are not swapped
* PPM is highly prone to noise : keep cables short, use 100nf capacitors, use shielded cable, use ferrites, stabilize voltage
⚠️ Red wire from sensor cable delivers 15v !!!
Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator.
## Transmitter configuration:
* Enable PPM
* Assign desired joystick to channel 1(steering) and channel 2(throttle)