diff --git a/Battery.md b/Battery.md
index 9b2f1c0..e7ed3e1 100644
--- a/Battery.md
+++ b/Battery.md
@@ -2,10 +2,10 @@ Most of the Hoverboard mainboards use a 10S2P LIPO Batteries (36v Nominal - 42v
 If you want to use a battery with less or more cells in series, change BAT_CELLS parameter in [config.h](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/blob/master/Inc/config.h) (10 by default).<br>
 Batteries up to 12S have been used safely in the community, but do it at your own risk.
 
-## Charging
+## :electric_plug: Charging
 You can charge the battery through the mainboard pcb or connect the battery directly to the charger through a custom xt60 adapter. 
 
-## Battery level low alerts:
+## :warning: Battery level low alerts:
 Default battery level are for safe use of LIPO batteries.<br>
 You can adjust the levels to your needs in [config.h](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/blob/master/Inc/config.h) if you want    to use a battery with a different chemistry.
 
@@ -18,7 +18,7 @@ You can adjust the levels to your needs in [config.h](https://github.com/Emanuel
 |LVL1|3.5v|Red Blink|Fast beeps|BAT_LVL1_ENABLE|BAT_LVL1|
 |DEAD|3.37v||Power Off|||
 
-## Inactivity timeout - Power Saving
+## :zzz: Inactivity timeout - Power Saving
 The board will automatically power off after approximatively 8 minutes of inactivity by default.<br>
 Parameter INACTIVITY_TIMEOUT can be used to set up the number of minutes of inactivity before power off. It is not very precise.<br>