diff --git a/Debug-Serial.md b/Debug-Serial.md
index d8fd6be..0cea1b6 100644
--- a/Debug-Serial.md
+++ b/Debug-Serial.md
@@ -1,9 +1,8 @@
-Debug Serial will allow you to get information from the board as Human readable ASCII output.<br />
-It can be used to:
+Debug Serial will allow you to get information from the board as Human readable ASCII output to:
 * Calibrate the battery voltage reading
 * Calibrate the temperature reading
 * Debug
-* Plot
+* Plot the results
 
 ## Wiring:
 * Connect GND and RX of a 3.3v uart-usb/FTDI adapter to the left (USART2) or right sensor board cable (USART3) depending on config.h settings