diff --git a/Variant-USART.md b/Variant-USART.md
index c915b79..8f51961 100644
--- a/Variant-USART.md
+++ b/Variant-USART.md
@@ -54,4 +54,5 @@ The least significant byte comes first (little endian).
 If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Diagnostics)
 * Make sure the baud rate is 115200
 * Make sure you are using the sensor cable(left=USART2 or right=USART3) selected in config.h
-* On some boards the wire colors might differ, try switching blue and green wires
\ No newline at end of file
+* On some boards the wire colors might differ, try switching blue and green wires
+* Your Arduino TX might not be working, you can verify that by trying with and FTDI and the Web tool to confirm the mainboard/firmware confirmation is not the issue 
\ No newline at end of file