diff --git a/Variant-IBUS.md b/Variant-IBUS.md
index a9d7a2a..c357197 100644
--- a/Variant-IBUS.md
+++ b/Variant-IBUS.md
@@ -3,7 +3,7 @@ It will send all channels on a single wire like PPM, but is more reliable as it
 Default number of channels for IBUS in config.h is 14 (successfully tested with Flysky fs-I6AB and RX2A).
 
 ## Wiring:
-* Connect green wire to IBUS port of your receiver on right sensor cable(shorter)
+* Connect IBUS port of your receiver to green wire on right sensor cable(shorter)
 * If you want to use the left cable instead, replace CONTROL_SERIAL_USART3 by CONTROL_SERIAL_USART2 and FEEDBACK_SERIAL_USART3 by FEEDBACK_SERIAL_USART2 in config.h
 
 ⚠ Red wire from sensor cable delivers 15v !!!