diff --git a/Variant-USART.md b/Variant-USART.md
index bfaaf87..9a6de59 100644
--- a/Variant-USART.md
+++ b/Variant-USART.md
@@ -2,7 +2,7 @@ This variant can be used to control the board from another board(e.g. Arduino, E
 The example [Arduino sketch](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/blob/master/Arduino/hoverserial/hoverserial.ino) will send commands and process the feedback.<br />
 
 You can also test this variant with following [Web Tool](https://github.com/Candas1/Hoverboard-Web-Serial-Control), it let's you control the board and trace feedback values.<br>
-[This issue](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/issues/157) has another example to control the firmware with Python code.
+This [Python code](https://github.com/kosni68/HoverSerial) inspired by this [issue](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/issues/157) can also be used to control the firmware.
 
 ## Wiring:
 * Connect blue wire to RX, green wire to TX and black wire to GND of Arduino on right sensor cable(shorter)