diff --git a/Variant-PWM.md b/Variant-PWM.md
index a673a2f..78c514a 100644
--- a/Variant-PWM.md
+++ b/Variant-PWM.md
@@ -6,6 +6,8 @@ CONTROL_PWM_RIGHT is for the right sensor cable and is set by default to limit t
 You can use CONTROL_PWM_LEFT instead if you need to use the left sensor cable.<br>
 DEBUG_SERIAL will be automatically enabled on the opposite cable.<br>
 
+Please also check the [parameters](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Parameters) that are common to all the variants.
+
 ## :electric_plug: Wiring:
 * Connect your receiver VCC to 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator, ⚠️ Red wire from sensor cable delivers 15v !!!
 * Connect channel 1(steering) of your receiver to blue wire and channel 2(speed) to green wire of the cable selected in config.h