diff --git a/Variant-IBUS.md b/Variant-IBUS.md
index 5f43fa7..7d58ebc 100644
--- a/Variant-IBUS.md
+++ b/Variant-IBUS.md
@@ -9,7 +9,7 @@ Use CONTROL_SERIAL_USART3 and FEEDBACK_SERIAL_USART3 for the right sensor cable(
 IBUS_NUM_CHANNELS is the number of channels for IBUS and is 14 by default. As an example Flysky fs-i6ab or RX2A receivers are sending 14 channels even when used with a 6 channel transmitter<br>
 
 ## Wiring:
-* Connect IBUS port of your receiver to green wire on the cable selected in config.h
+* Connect IBUS/Servo port of your receiver to green wire on the cable selected in config.h
 
 ⚠ Red wire from sensor cable delivers 15v !!!
 Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator.