From 6a91ae61e21497e1d29e0f27657578542534eac3 Mon Sep 17 00:00:00 2001 From: Candas1 Date: Thu, 20 Jan 2022 16:24:25 +0100 Subject: [PATCH] Updated Variant IBUS (markdown) --- Variant-IBUS.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Variant-IBUS.md b/Variant-IBUS.md index 5f43fa7..7d58ebc 100644 --- a/Variant-IBUS.md +++ b/Variant-IBUS.md @@ -9,7 +9,7 @@ Use CONTROL_SERIAL_USART3 and FEEDBACK_SERIAL_USART3 for the right sensor cable( IBUS_NUM_CHANNELS is the number of channels for IBUS and is 14 by default. As an example Flysky fs-i6ab or RX2A receivers are sending 14 channels even when used with a 6 channel transmitter
## Wiring: -* Connect IBUS port of your receiver to green wire on the cable selected in config.h +* Connect IBUS/Servo port of your receiver to green wire on the cable selected in config.h ⚠ Red wire from sensor cable delivers 15v !!! Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator.