From 6ca40d87bc085ec833780e668db3100756e0bc7e Mon Sep 17 00:00:00 2001 From: Candas1 Date: Fri, 24 May 2024 09:11:26 +0200 Subject: [PATCH] Updated Variant IBUS (markdown) --- Variant-IBUS.md | 1 + 1 file changed, 1 insertion(+) diff --git a/Variant-IBUS.md b/Variant-IBUS.md index 72567be..4687a55 100644 --- a/Variant-IBUS.md +++ b/Variant-IBUS.md @@ -30,4 +30,5 @@ If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hac * Make sure you enabled IBUS on your transmitter, on some models it is activated together with PPM * Make sure you are using the sensor cable(left=CONTROL_SERIAL_USART2 or right=CONTROL_SERIAL_USART3) selected in config.h * On some boards the wire colors might differ, try the blue wire +* If you have added capacitors for PWM/PPM, remove it * You might have a defective MCU input, a missing 101 smd resistor or with too high resistance (e.g. [issue](https://github.com/EFeru/hoverboard-firmware-hack-FOC/issues/244)), you can configure the firmware to work on the other cable \ No newline at end of file