From 7a092b655ce23a01dcad9cbe7b1f14fde1afcb94 Mon Sep 17 00:00:00 2001 From: Candas1 Date: Sun, 2 Jan 2022 16:22:51 +0100 Subject: [PATCH] Updated Battery (markdown) --- Battery.md | 1 + 1 file changed, 1 insertion(+) diff --git a/Battery.md b/Battery.md index 5e11764..4944980 100644 --- a/Battery.md +++ b/Battery.md @@ -30,6 +30,7 @@ If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hac * With a battery of low quality/bad health, pulling a lot of current will result in a big battery voltage drop and trigger battery low alerts. You can use a better battery or several similar batteries in parallel * Reducing the [battery low levels](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Battery/_edit#battery-level-low-alerts) can help but going too low can be risky for your battery * You can limit the [current](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) being drawn to reduce the voltage drop but you will also reduce the power +* [Debug Serial](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Debug-Serial) can be used to monitor battery voltage If the board turns off without the melody, the BMS is shutting the power off * You might be drawing too much current. You can limit the [current](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) being drawn not to trigger the BMS over-discharge protection but you will reduce the power