diff --git a/Variant-PWM.md b/Variant-PWM.md
index e04d816..552082e 100644
--- a/Variant-PWM.md
+++ b/Variant-PWM.md
@@ -2,7 +2,7 @@ This variant can be used with Pulse Width Modulation RC Receivers.
 
 
 ## Wiring:
-* Connect channel 1 of your receiver to blue wire and channel 2 to green wire. By default, PWM variant is using right sensor cable(shorter) to minimize noise
+* Connect channel 1 of your receiver to blue wire and channel 2 to green wire on right sensor cable(shorter)
 
 ⚠ Red wire from sensor cable delivers 15v !!!
 Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator.