diff --git a/Variant-IBUS.md b/Variant-IBUS.md
index bd6a496..bfdc696 100644
--- a/Variant-IBUS.md
+++ b/Variant-IBUS.md
@@ -8,6 +8,8 @@ Ibus control is reusing some of the USART control parameters.<br>
 Use CONTROL_SERIAL_USART3 and FEEDBACK_SERIAL_USART3 for the right sensor cable(default), or CONTROL_SERIAL_USART2 and FEEDBACK_SERIAL_USART2 for left sensor cable.<br>
 IBUS_NUM_CHANNELS is the number of channels for IBUS and is 14 by default. As an example Flysky fs-i6ab or RX2A receivers are sending 14 channels even when used with a 6 channel transmitter<br>
 
+Please also check the [parameters](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Parameters) that are common to all the variants.
+
 ## :electric_plug: Wiring:
 * Connect your receiver VCC to 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator, ⚠️ Red wire from sensor cable delivers 15v !!!
 * Connect IBUS/Servo port of your receiver to green wire on the cable selected in config.h