From 851f3b49d6ffd638bdcb996b4ef0a0663d955a9c Mon Sep 17 00:00:00 2001 From: Candas1 Date: Tue, 19 Jul 2022 22:19:18 +0200 Subject: [PATCH] Updated Variant IBUS (markdown) --- Variant-IBUS.md | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Variant-IBUS.md b/Variant-IBUS.md index bd6a496..bfdc696 100644 --- a/Variant-IBUS.md +++ b/Variant-IBUS.md @@ -8,6 +8,8 @@ Ibus control is reusing some of the USART control parameters.
Use CONTROL_SERIAL_USART3 and FEEDBACK_SERIAL_USART3 for the right sensor cable(default), or CONTROL_SERIAL_USART2 and FEEDBACK_SERIAL_USART2 for left sensor cable.
IBUS_NUM_CHANNELS is the number of channels for IBUS and is 14 by default. As an example Flysky fs-i6ab or RX2A receivers are sending 14 channels even when used with a 6 channel transmitter
+Please also check the [parameters](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Parameters) that are common to all the variants. + ## :electric_plug: Wiring: * Connect your receiver VCC to 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator, ⚠️ Red wire from sensor cable delivers 15v !!! * Connect IBUS/Servo port of your receiver to green wire on the cable selected in config.h