From 88faa35e170842c7d9be5e26a558fba3676f9aec Mon Sep 17 00:00:00 2001 From: Candas1 Date: Thu, 19 Nov 2020 23:14:48 +0100 Subject: [PATCH] Updated PPM Control (markdown) --- PPM-Control.md | 1 + 1 file changed, 1 insertion(+) diff --git a/PPM-Control.md b/PPM-Control.md index ff7c4bb..fa35e7c 100644 --- a/PPM-Control.md +++ b/PPM-Control.md @@ -10,6 +10,7 @@ Default number of channels for PPM in config.h is 6. If the board is beeping * Check the number of channels, even if you transmitter only handles 6 channels, you receiver might transmit more channels * Make sure you enabled PPM on your transmitter +* Make sure you are using the sensor cable(left or right) you selected in config.h ⚠ Red wire from sensor cable delivers 15v !!! Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator. \ No newline at end of file