From 95e6cd25ffe3098f0fbda24d7d61754bcd716dd6 Mon Sep 17 00:00:00 2001 From: Candas1 Date: Fri, 24 May 2024 09:12:11 +0200 Subject: [PATCH] Updated Variant NUNCHUK (markdown) --- Variant-NUNCHUK.md | 1 + 1 file changed, 1 insertion(+) diff --git a/Variant-NUNCHUK.md b/Variant-NUNCHUK.md index 45cb49a..a136ed8 100644 --- a/Variant-NUNCHUK.md +++ b/Variant-NUNCHUK.md @@ -29,5 +29,6 @@ If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hac * On some boards the wire colors might differ, try switching blue and green cable * Keep cable short, use shielded cable, use ferrits, stabilize voltage in nunchuk * It could be the chip's ports are defective, or the 101 smd resistors are either missing or have a too high resistance: do you have another board to try with ? This will help understand wether the problem is the board or the nunchuk +* If you have added capacitors for PWM/PPM, remove it