From 9c3f4f2dddfcfa37b6ea678125d96328659d4b5c Mon Sep 17 00:00:00 2001 From: Candas1 Date: Thu, 21 Apr 2022 10:19:19 +0200 Subject: [PATCH] Updated Variant TRANSPOTTER (markdown) --- Variant-TRANSPOTTER.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Variant-TRANSPOTTER.md b/Variant-TRANSPOTTER.md index 59d8706..aed771a 100644 --- a/Variant-TRANSPOTTER.md +++ b/Variant-TRANSPOTTER.md @@ -1,7 +1,7 @@ -## Build +## :hammer_and_wrench:Build [Transpotter build from Lucy](https://github.com/NiklasFauth/hoverboard-firmware-hack/wiki/Build-Instruction:-TranspOtter) -## Wiring: +## :electric_plug: Wiring: * Connect the potentiometer VCC to 3.3v from programming port or from a voltage regulator, ⚠️ Red wire from sensor cable delivers 15v !!! * Connect the output of the potentiometer to the blue wire (ADC1) for distance and green wire (ADC2) for steering on left sensor board cable * Connect the potentiometer/hall sensor to ground, ⚠️ On some boards, the black wire is 15v !!! Check with a multi-meter to make sure 15V and ground are not swapped