EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-05 02:24:26 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated Variant PPM (markdown)

Candas1
2021-07-06 13:51:47 +02:00
parent 241a99c73d
commit 9f7bc65a78
1 changed files with 2 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
Variant-PPM.md

@@ -4,6 +4,8 @@ Default number of channels for PPM in config.h is 6 (Successfully tested Flysky
## Wiring: ## Wiring:
* Connect PPM port of your receiver to green wire on right sensor cable(shorter) * Connect PPM port of your receiver to green wire on right sensor cable(shorter)
* PPM is highly prone to noise : keep cables short, use 100nf capacitors, use shielded cable, use ferrites, stabilize voltage
⚠ Red wire from sensor cable delivers 15v !!! ⚠ Red wire from sensor cable delivers 15v !!!
Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator. Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator.
@@ -22,5 +24,4 @@ If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hac
* Make sure you enabled PPM on your transmitter * Make sure you enabled PPM on your transmitter
* Make sure you use the PPM port on your receiver * Make sure you use the PPM port on your receiver
* Make sure you are using the sensor cable(left or right) selected in config.h * Make sure you are using the sensor cable(left or right) selected in config.h
* PPM is highly prone to noise, keep cables short, use shielded cable, use ferrites, stabilize voltage
* On some boards the wire colors might differ, try the blue wire * On some boards the wire colors might differ, try the blue wire