diff --git a/Battery.md b/Battery.md
index 41d402b..876b5aa 100644
--- a/Battery.md
+++ b/Battery.md
@@ -29,10 +29,10 @@ If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hac
 * [Calibrate the battery voltage](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Battery#calibration)
 * With a battery of low quality/bad health, pulling a lot of current will result in a big battery voltage drop and trigger battery low alerts. You can use a better battery or several similar batteries in parallel
 * Reducing the [battery low levels](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Battery/_edit#battery-level-low-alerts) can help but going too low can be risky for your battery
-* You can reduce the [current limit](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) but you will lose power
+* You can limit the [current](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) being drawn to reduce the voltage drop but you will also reduce the power
 
 If the board turns off without the melody, the BMS is shutting the power off:
-* You might be drawing too much current. You can reduce the [current limit](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) not to trigger the BMS over-discharge protection but you will lose power
+* You might be drawing too much current. You can limit the [current](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) being drawn not to trigger the BMS over-discharge protection but you will reduce the power
 * It can happen if your battery is fully charged and too much current is flowing back (regenerative braking), it can trigger overcharge protection
 You will have to unplug the battery and plug it again