From aa9c33517460937d64890b202925382eeecaecee Mon Sep 17 00:00:00 2001 From: Candas1 Date: Wed, 11 May 2022 09:02:15 +0200 Subject: [PATCH] Updated Battery (markdown) --- Battery.md | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/Battery.md b/Battery.md index a43aa35..1742560 100644 --- a/Battery.md +++ b/Battery.md @@ -16,7 +16,9 @@ You can adjust the levels to your needs in [config.h](https://github.com/Emanuel |LVL3|3.7v|Yellow blink|||BAT_LVL3| |LVL2|3.6v|Red|Slow beeps|BAT_LVL2_ENABLE|BAT_LVL2| |LVL1|3.5v|Red Blink|Fast beeps|BAT_LVL1_ENABLE|BAT_LVL1| -|DEAD|3.37v||Power Off||| +|DEAD|3.37v||Power Off|BAT_DEAD_ENABLE|| + +BAT_LVL1_ENABLE and BAT_DEAD_ENABLE are enabled by default, you can disable it by making it 0 in the config.h file. ## :zzz: Inactivity timeout - Power Saving The board will automatically power off after approximatively 8 minutes of inactivity by default.
@@ -40,6 +42,9 @@ If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hac * You can limit the [current](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) being drawn to reduce the voltage drop but you will also reduce the power * [Debug Serial](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Debug-Serial) can be used to monitor battery voltage +You can turn off the battery dead power off with BAT_DEAD_ENABLE parameter for debugging.
+
+ If the board turns off without the melody, the BMS is shutting the power off * You are drawing too much current which triggers the over-discharge protection of your BMW. You can limit the [current](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) but you will reduce the power * It can happen if your battery is fully charged and too much current is flowing back (regenerative braking), it can trigger overcharge protection of your BMS