From ac1705851f5310e40f50a885f7b2ceae0cfe8751 Mon Sep 17 00:00:00 2001 From: Candas1 Date: Sat, 21 Nov 2020 11:57:49 +0100 Subject: [PATCH] Updated Variant PPM (markdown) --- Variant-PPM.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Variant-PPM.md b/Variant-PPM.md index 6c25eda..5fb25c2 100644 --- a/Variant-PPM.md +++ b/Variant-PPM.md @@ -3,7 +3,7 @@ As opposed to PWM, it will send all channels on a single wire one after the othe Default number of channels for PPM in config.h is 6. ## Wiring: -* Connect green wire to your receiver. By default, PPM variant is using right sensor cable(shorter) to minimize noise +* Connect green wire to your receiver on right sensor cable(shorter) ⚠ Red wire from sensor cable delivers 15v !!! Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator.