mirror of
https://github.com/EFeru/hoverboard-firmware-hack-FOC.git
synced 2025-08-04 18:14:28 +02:00
Updated Troubleshooting (markdown)
@@ -19,9 +19,11 @@ The board is turning ON as soon as the battery or charger is connected, and you
|
|||||||
|
|
||||||
The board is not turning OFF when pressing the ON/OFF button
|
The board is not turning OFF when pressing the ON/OFF button
|
||||||
* It can happen when the battery [voltage](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Battery) is too low
|
* It can happen when the battery [voltage](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Battery) is too low
|
||||||
|
<br>
|
||||||
|
|
||||||
When plugging in the battery, the XT60 connector burns
|
When plugging in the battery, the XT60 connector burns
|
||||||
* It could be at least 2 mosfets of the same half-bridge/phase are shorted. Use a multi-meter to check the continuity between drain and source. If your multi-meter beeps, the mosfet is shorted so you need to replace it
|
* It could be at least 2 mosfets of the same half-bridge/phase are shorted. Use a multi-meter to check the continuity between drain and source. If your multi-meter beeps, the mosfet is shorted so you need to replace it
|
||||||
|
<br>
|
||||||
|
|
||||||
You are unable to unlock the chip or flash the firmware
|
You are unable to unlock the chip or flash the firmware
|
||||||
* Check [this](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Compiling-and-flashing-the-firmware) section
|
* Check [this](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Compiling-and-flashing-the-firmware) section
|
||||||
|
Reference in New Issue
Block a user