From c3e37516c0857b3f7117c46e9fa43dcf43e4df32 Mon Sep 17 00:00:00 2001 From: Candas1 Date: Tue, 14 Feb 2023 08:27:29 +0100 Subject: [PATCH] Updated Variant USART (markdown) --- Variant-USART.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Variant-USART.md b/Variant-USART.md index 035f1b0..1ce32df 100644 --- a/Variant-USART.md +++ b/Variant-USART.md @@ -69,4 +69,5 @@ If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hac * Make sure you are using the sensor cable(left=CONTROL_SERIAL_USART2 or right=CONTROL_SERIAL_USART3) selected in config.h * Assuming RX or/and TX can be defective on your mainboard, you can switch to other sensor cable in config.h * On some boards the wire colors might differ, try switching blue and green wires -* Your Arduino TX/RX might not be working, you can verify that by trying with and FTDI and the Web tool to confirm the mainboard/firmware is not the issue \ No newline at end of file +* Your Arduino TX/RX might not be working, you can verify that by trying with and FTDI and the Web tool to confirm the mainboard/firmware is not the issue +* The 101 smd resistors on the mainboard for those inputs might be either missing or defect(resistance is too high) \ No newline at end of file